WS-8418AL-IT - Clock LA CROSSE TECHNOLOGY - Free user manual and instructions
Find the device manual for free WS-8418AL-IT LA CROSSE TECHNOLOGY in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Radio-Controlled Clock |
| Model | WS-8418AL-IT |
| Brand | La Crosse Technology |
| Dimensions | Approximately 7.5 x 2.5 x 7.5 inches (19 x 6.5 x 19 cm) |
| Weight | About 0.5 lbs (227 g) |
| Power Source | 2 AA alkaline batteries (not included) |
| Display Type | LCD digital display with large digits |
| Time Sync | Atomic time signal (WWVB) auto-sync |
| Time Format | 12 or 24 hour selectable |
| Calendar | Day, date, month display |
| Alarm | Single alarm with snooze function |
| Indoor Temperature | Indoor temperature display (°F/°C) |
| Indoor Humidity | Indoor humidity display (RH%) |
| Outdoor Sensor | Not included (model specific) |
| Mounting | Desk stand or wall mountable |
| Battery Life | Approximately 12 months with quality batteries |
| Maintenance | Clean with soft dry cloth; avoid liquids |
| Safety | Use only specified batteries; keep away from moisture |
| Spare Parts | Contact manufacturer for replacement parts |
| Repairability | Designed for replacement rather than repair; no user-serviceable parts |
| General Info | Manual available for free download at notice-facile.com |
Frequently Asked Questions - WS-8418AL-IT LA CROSSE TECHNOLOGY
How do I set the time manually if the atomic signal is not received?
Press and hold the SET button for about 3 seconds until the time digits flash. Use UP or DOWN buttons to adjust hour, minute, year, month, date. Press SET to confirm each setting. The clock will attempt to sync with the atomic signal daily.
What type of batteries does the clock use and how long do they last?
The WS-8418AL-IT uses 2 AA alkaline batteries. Battery life is approximately 12 months under normal use. For best performance, replace batteries annually or when the low battery indicator appears.
How do I enable or disable the alarm?
Press the ALARM button to view the alarm time. Press ALARM again to toggle the alarm on/off. When the alarm is on, the alarm icon will display. The alarm sounds for about 2 minutes unless you press SNOOZE or ALARM to turn it off.
What is the snooze duration and how to use it?
When the alarm sounds, press the SNOOZE button (usually a light button) to activate snooze. The alarm will re-sound after approximately 10 minutes. The snooze can be used multiple times.
How do I switch between 12-hour and 24-hour time format?
In normal time display, press and hold the SET button for 3 seconds to enter settings. Use UP or DOWN to navigate to time format setting (12H/24H). Press SET to toggle, then press SET again to exit.
The clock does not show the correct time after replacement?
If the atomic signal is weak, the clock may not sync immediately. Place the clock near a window with the back facing Colorado (for WWVB). Press and hold the REC or WAVE button (if available) to force a signal search. If no signal, set time manually as per manual.
Can I mount the clock on a wall?
Yes, the clock has a slot on the back for wall mounting. Use a screw (not included) appropriate for your wall type. Ensure the clock is level and secure.
What does the '--' or 'ERR' display mean?
'--' indicates that the clock is searching for the atomic signal or the signal is too weak. 'ERR' may appear if the batteries are low or an internal error occurs. Replace batteries and try manual set. If persistent, reset the clock by removing batteries for 10 seconds.
How do I reset the clock to factory defaults?
Remove the batteries from the clock. Wait at least 10 seconds. Insert fresh batteries again. The clock will reset and start searching for the atomic signal. You may need to set time manually if signal is not acquired.
Is the clock water resistant?
No, the WS-8418AL-IT is not water resistant. It is intended for indoor use only. Keep away from water, high humidity, and extreme temperatures. Clean with a dry, soft cloth.
User questions about WS-8418AL-IT LA CROSSE TECHNOLOGY
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Clock in PDF format for free! Find your manual WS-8418AL-IT - LA CROSSE TECHNOLOGY and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. WS-8418AL-IT by LA CROSSE TECHNOLOGY.
USER MANUAL WS-8418AL-IT LA CROSSE TECHNOLOGY
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : LA CROSSE TECHNOLOGY
Model : WS-8418AL-IT
Category : Clock