WS-8001U - Clock LA CROSSE TECHNOLOGY - Free user manual and instructions
Find the device manual for free WS-8001U LA CROSSE TECHNOLOGY in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Atomic Wall Clock with Temperature and Humidity |
| Brand | La Crosse Technology |
| Model | WS-8001U |
| Dimensions | 12.4 x 8.3 x 1.2 inches (31.5 x 21.1 x 3 cm) |
| Weight | 1.2 lbs (0.54 kg) |
| Power Supply | 2 AA alkaline batteries (not included) |
| Power Consumption | 0.5 watts average |
| Time Sync | WWVB atomic radio-controlled time signal |
| Time Zones | 7 time zones (Atlantic, Eastern, Central, Mountain, Pacific, Alaska, Hawaii) |
| Calendar | Date display with day of week, month, and date |
| Indoor Temperature | Range: 14°F to 122°F (-10°C to 50°C) |
| Indoor Humidity | Range: 1% to 99% relative humidity |
| Outdoor Temperature | Remote sensor range: -40°F to 140°F (-40°C to 60°C) |
| Outdoor Humidity | Remote sensor range: 1% to 99% |
| Wireless Range | Up to 300 feet (91 meters) open air |
| Number of Remote Sensors | Supports up to 3 sensors (optional) |
| Display Type | LCD with large digits, backlight (optional) |
| Mounting | Wall mountable or freestanding |
| Material | Plastic casing with glass lens |
| Battery Life | Approximately 12 months (alkaline) |
| Operating Temperature | 32°F to 122°F (0°C to 50°C) |
| Storage Temperature | -4°F to 122°F (-20°C to 50°C) |
| Cleaning | Wipe with a soft, dry cloth. Do not use abrasive cleaners or liquids. |
| Safety Precautions | Keep away from water, heat sources, and direct sunlight. Use only specified batteries. Remove batteries for long storage. |
| Spare Parts / Repairability | No user-serviceable parts. Contact La Crosse Technology for service or replacement. |
| Warranty | 1-year limited warranty from date of purchase |
Frequently Asked Questions - WS-8001U LA CROSSE TECHNOLOGY
How does the atomic time sync work on the WS-8001U?
The clock receives the WWVB time signal from Fort Collins, Colorado, in the United States. It automatically syncs nightly to ensure accurate time. For best reception, place the clock near a window facing Colorado.
What type of batteries does the WS-8001U clock require?
The clock requires 2 AA alkaline batteries (not included). Do not use rechargeable batteries as they may not provide consistent voltage.
How do I set the time zone on the WS-8001U?
Press the SET button to enter settings. Use the +/- buttons to scroll through available time zones (Atlantic, Eastern, Central, Mountain, Pacific, Alaska, Hawaii). Confirmation occurs automatically after a few seconds.
Can I connect additional remote sensors to the WS-8001U?
Yes, the clock can support up to 3 remote sensors (model TXU or similar). Each sensor must be paired separately. The display will cycle through sensor readings automatically.
Why is my WS-8001U not showing the correct outdoor temperature?
First, ensure the remote sensor is within range (up to 300 feet open air). Check battery levels in both the clock and sensor. Interference from metal objects or electronics may also affect transmission.
How do I change the display from Fahrenheit to Celsius?
Press and hold the TEMP button for 3 seconds to toggle between Fahrenheit (°F) and Celsius (°C). The change applies to both indoor and outdoor readings.
What does the HI/LO reading on the WS-8001U indicate?
The HI and LO indicators show the maximum and minimum recorded temperature and humidity since the last reset. To clear the records, press and hold the MEM button.
Is the WS-8001U backlit?
The clock has a backlight that can be activated by pressing the SNOOZE/LIGHT button. The backlight stays on for about 10 seconds then turns off to conserve battery.
What should I do if the clock stops receiving the atomic signal?
Try relocating the clock closer to a window or away from large metal objects. Press and hold the REC button for 3 seconds to force a manual sync. The signal icon will flash until a signal is acquired.
Can the WS-8001U be mounted on a wall?
Yes, the clock has a keyhole slot on the back for wall mounting. Use a screw and anchor suitable for your wall type. The clock can also stand on a flat surface using the fold-out kickstand.
User questions about WS-8001U LA CROSSE TECHNOLOGY
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Clock in PDF format for free! Find your manual WS-8001U - LA CROSSE TECHNOLOGY and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. WS-8001U by LA CROSSE TECHNOLOGY.
USER MANUAL WS-8001U LA CROSSE TECHNOLOGY
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : LA CROSSE TECHNOLOGY
Model : WS-8001U
Category : Clock