XLE100 - Heating DIMPLEX - Free user manual and instructions
Find the device manual for free XLE100 DIMPLEX in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Electric Fan Heater |
| Brand | Dimplex |
| Model | XLE100 |
| Power Output | 1000 W |
| Voltage | 220-240 V / 50 Hz |
| Heat Settings | 2 (Low / High) |
| Thermostat Control | Adjustable mechanical thermostat |
| Safety Features | Overheat protection, tip-over switch, thermal fuse |
| Dimensions (H x W x D) | 240 x 200 x 140 mm |
| Weight | 1.5 kg |
| Housing Material | ABS plastic, metal grille |
| Installation | Freestanding or wall-mounted (bracket not included) |
| Noise Level | Approx. 45 dB |
| Recommended Room Size | Up to 20 m² |
| Cleaning | Wipe with damp cloth; disconnect before cleaning |
| Maintenance | Remove dust from grille and fan regularly |
| Spare Parts Available | Yes (thermostat, heating element, fan motor) |
| Reparability | User-replaceable parts: thermostat, fuse. Professional service for others. |
| Certifications | CE, GS |
| Warranty | 2 years |
Frequently Asked Questions - XLE100 DIMPLEX
How do I adjust the thermostat on the Dimplex XLE100?
Rotate the thermostat dial clockwise to increase the desired temperature. The heater will cycle on/off to maintain that temperature. Turn fully clockwise for maximum heat (continuous operation).
What should I do if the heater turns off unexpectedly?
The heater has overheat protection and a tip-over switch. If it turns off, check if it has tipped over or if the air intake/exhaust is blocked. Unplug, let it cool for 10 minutes, remove any obstructions, and plug back in. If the problem persists, contact support.
Can I use the XLE100 in a bathroom?
No, this heater is not rated for bathroom use unless specifically marked IPX4 or higher. It should only be used in dry indoor areas, away from water and humidity.
How many heat settings does the XLE100 have?
The XLE100 has two heat settings: Low (500W) and High (1000W), selected via a two-position switch. The fan-only mode is not available.
Is the Dimplex XLE100 quiet?
It produces a typical fan heater noise, approximately 45 dB, which is similar to a quiet conversation. It is not silent but acceptable for most rooms.
Can I leave the heater on overnight?
It is not recommended to leave the heater unattended for long periods, especially while sleeping. The heater has safety features, but for safety, always turn off and unplug when not in use.
How do I clean the XLE100?
Unplug the heater and allow it to cool. Use a soft, dry cloth to wipe the exterior. For the grille, use a vacuum cleaner with a brush attachment to remove dust. Do not use water or liquids.
What is the recommended room size for this heater?
The XLE100 is suitable for small to medium rooms up to 20 m² (approximately 20 sq m) with standard ceiling height. Use a higher wattage heater for larger spaces.
Can I wall-mount the XLE100?
Yes, the heater can be wall-mounted using appropriate brackets (not included). Ensure the wall mount is securely fixed and the heater is at least 30 cm from ceilings and floors.
Where can I find spare parts for the XLE100?
Spare parts such as the thermostat, heating element, and fan motor are available through authorized Dimplex dealers or online spare parts stores. Check the user manual for part numbers.
User questions about XLE100 DIMPLEX
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Heating in PDF format for free! Find your manual XLE100 - DIMPLEX and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. XLE100 by DIMPLEX.
USER MANUAL XLE100 DIMPLEX
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : DIMPLEX
Model : XLE100
Category : Heating