Mimiq Doubler - Uncategorized TC ELECTRONIC - Free user manual and instructions
Find the device manual for free Mimiq Doubler TC ELECTRONIC in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Stompbox Doubler Pedal |
| Brand | TC Electronic |
| Model | Mimiq Doubler |
| Dimensions | 72 x 122 x 52 mm (2.8 x 4.8 x 2.0 in) |
| Weight | 400 g (0.88 lbs) |
| Power Supply | 9V DC (center negative), 100 mA min |
| Battery Compatibility | 9V battery (not included) |
| Audio Input | 1/4" TS mono jack |
| Audio Outputs | 2 x 1/4" TS mono jacks (stereo capable) |
| Effect Type | Doubling / Double Tracking |
| Controls | Mode switch (Mono/Stereo), Effect Level knob, Tone knob, Footswitch |
| True Bypass | Yes |
| Latency | < 3 ms |
| Construction | Metal chassis with rugged finish |
| Accessories Included | User manual, sticker |
| Warranty | 2 years limited |
| Cleaning Instructions | Wipe with a dry cloth; avoid solvents |
| Safety Precautions | Do not expose to moisture or extreme temperatures |
| Repairability | User-serviceable battery compartment; professional repair for electronics |
| Country of Origin | China |
Frequently Asked Questions - Mimiq Doubler TC ELECTRONIC
How do I power the Mimiq Doubler?
Use a standard 9V DC power supply with center negative polarity and at least 100 mA current. A 9V battery can also be used, but it is not included.
What cables do I need?
You'll need a 1/4" TS instrument cable for input and two 1/4" TS cables for stereo outputs. For mono operation, use only the left output.
How do I set up the pedal for stereo?
Connect the left and right outputs to two separate amplifier inputs or mixer channels. Set the mode switch to 'Stereo' for a wider double-tracking effect.
What does the Tone knob do?
The Tone knob adjusts the high-frequency content of the doubled signal. Turn it clockwise for a brighter tone, counterclockwise for a darker, more subtle effect.
Can I use the Mimiq Doubler with bass guitar?
Yes, the pedal works with bass guitars, though the effect may be subtler due to lower frequencies. It is designed for electric guitar primarily.
How do I achieve a realistic double tracking sound?
Set the Mode switch to 'Mono' and adjust the Effect Level knob to about 50%. The pedal adds subtle pitch and time variations to simulate two takes.
Is the pedal true bypass?
Yes, the Mimiq Doubler features true bypass, ensuring your clean signal remains unaffected when the pedal is off.
What is the maximum input level?
The pedal accepts standard instrument levels up to +5 dBu. It is designed for typical guitar and bass pickups.
How do I clean the pedal?
Disconnect power and cables, then wipe the enclosure with a soft, dry cloth. Do not use abrasive cleaners or solvents.
What should I do if the pedal stops working?
Check the power supply, cables, and battery (if used). If issues persist, contact TC Electronic support or an authorized service center.
User questions about Mimiq Doubler TC ELECTRONIC
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Uncategorized in PDF format for free! Find your manual Mimiq Doubler - TC ELECTRONIC and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. Mimiq Doubler by TC ELECTRONIC.
USER MANUAL Mimiq Doubler TC ELECTRONIC
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : TC ELECTRONIC
Model : Mimiq Doubler
Category : Uncategorized