ProSafe GS724TPv2 - Server NETGEAR - Free user manual and instructions
Find the device manual for free ProSafe GS724TPv2 NETGEAR in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Gigabit Ethernet PoE+ Smart Managed Switch |
| Number of Ports | 24 PoE+ Gigabit Ethernet ports, 2 combo SFP ports |
| PoE Budget | 190W total |
| Form Factor | 1U rack-mountable |
| Dimensions | 17.3 x 8.0 x 1.7 in (440 x 204 x 43 mm) |
| Weight | 3.5 kg (7.7 lbs) |
| Power Supply | 100-240V AC, 50-60Hz, internal |
| Power Consumption | Maximum 250W with PoE |
| Switching Capacity | 56 Gbps |
| Forwarding Rate | 41.7 Mpps |
| MAC Address Table | 8K entries |
| VLAN Support | 802.1Q VLAN, up to 256 VLANs |
| Management Features | Web-based GUI, SNMP, CLI, Auto-VoIP, QoS |
| Security | 802.1X, ACL, port security |
| Cooling | 2 internal fans, intelligent fan speed control |
| Operating Temperature | 0° to 50°C (32° to 122°F) |
| Safety Certifications | UL, CE, FCC Class A |
| Maintenance | Keep vents clean; use soft dry cloth; no liquid cleaners. |
| Repairability | No user-serviceable parts; contact Netgear support for issues. |
Frequently Asked Questions - ProSafe GS724TPv2 NETGEAR
How do I reset the Netgear ProSafe GS724TPv2 to factory defaults?
Press and hold the Factory Reset button on the front panel for about 10 seconds until the LEDs flash. Alternatively, use the web interface under Maintenance > Reset.
What is the maximum PoE power per port?
Each PoE+ port can deliver up to 30W, with a total budget of 190W for all ports.
Does the GS724TPv2 support VLAN configuration?
Yes, it supports 802.1Q VLAN with up to 256 VLANs. You can configure via the web interface or CLI.
Can I use SFP modules for fiber connections?
Yes, the switch has 2 combo SFP ports that accept 1000BASE-SX/LX or 100BASE-FX modules.
How do I access the web management interface?
Connect a cable to any port, set your PC to DHCP, then open a browser and go to the switch's IP (default is 192.168.0.239). Use login credentials (default admin/password).
What does the 'Speed' LED indicate?
Green = 1000 Mbps, Amber = 10/100 Mbps, Off = no link.
Can I mount the switch on a wall?
No, this model is designed for 1U rack-mounting only. Use the provided rack ears.
How do I update the firmware?
Download the latest firmware from Netgear support. In the web interface, go to Maintenance > File Management > Firmware Upgrade and upload the file.
Does the switch support SNMP?
Yes, it supports SNMP v1/v2c for network monitoring. You can configure community strings in the web interface.
What is the default IP address of the switch?
The default IP is 192.168.0.239 with subnet mask 255.255.255.0.
User questions about ProSafe GS724TPv2 NETGEAR
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Server in PDF format for free! Find your manual ProSafe GS724TPv2 - NETGEAR and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. ProSafe GS724TPv2 by NETGEAR.
USER MANUAL ProSafe GS724TPv2 NETGEAR
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : NETGEAR
Model : ProSafe GS724TPv2
Category : Server