ProSafe WNDAP330 - Access Point NETGEAR - Free user manual and instructions
Find the device manual for free ProSafe WNDAP330 NETGEAR in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Wireless Access Point |
| Dimensions (W x D x H) | 25.4 x 17.8 x 4.1 cm (10.0 x 7.0 x 1.6 in) |
| Weight | 0.9 kg (2.0 lb) |
| Power Supply | 12V DC, 1A (external adapter) |
| Power over Ethernet (PoE) | 802.3af PoE compliant |
| Wireless Standards | IEEE 802.11a/b/g/n dual-band |
| Frequency Bands | 2.4 GHz and 5 GHz |
| Maximum Data Rate | 300 Mbps per band (aggregate 600 Mbps) |
| Antennas | 6 internal antennas (3 per band) |
| Ethernet Ports | 1 x 10/100/1000 Mbps (RJ-45, PoE input) |
| Management | Web GUI, SNMP, Telnet, SSH |
| Security | WEP, WPA/WPA2 Personal/Enterprise, 802.1X, MAC ACL, VLAN |
| Mounting | Wall/ceiling mount kit included |
| Operating Temperature | 0°C to 50°C (32°F to 122°F) |
| Humidity | 5% to 95% (non-condensing) |
| Certifications | FCC, CE, IC, Wi-Fi Alliance |
| Warranty | 2 years limited |
| Maintenance | Clean with a dry, soft cloth; avoid liquids |
| Repairability | No user-serviceable parts; contact support for repairs |
Frequently Asked Questions - ProSafe WNDAP330 NETGEAR
How do I reset the WNDAP330 to factory defaults?
Press and hold the reset button on the back panel for 10 seconds using a paperclip. The device will reboot with default settings.
Can I use PoE to power the access point?
Yes, the WNDAP330 supports 802.3af Power over Ethernet. Connect a PoE switch or injector to the Ethernet port.
What is the default IP address and login?
The default IP is 192.168.0.100, username admin, password password (case-sensitive). Reset if changed.
Does this access point support dual-band simultaneous operation?
Yes, it can operate on both 2.4 GHz and 5 GHz bands simultaneously, providing up to 300 Mbps per band.
How can I update the firmware?
Download the latest firmware from NETGEAR support, log into the web GUI, go to Administration > Firmware Upgrade, and upload the file.
Is the WNDAP330 compatible with VLANs?
Yes, it supports 802.1Q VLAN tagging for both management and wireless SSIDs. Configure in the VLAN settings.
What security modes are available?
It supports WEP, WPA/WPA2 Personal, WPA/WPA2 Enterprise with RADIUS, and MAC address filtering.
Can I mount the access point on a wall or ceiling?
Yes, the package includes a mounting bracket for wall or ceiling installation. Use the provided screws and anchors.
How many SSIDs can I configure?
You can create up to 8 SSIDs per band (16 total) with separate security and VLAN settings.
What should I do if the device is not powering on?
Check the power adapter connection or PoE source. Ensure the Ethernet cable is properly connected. If using PoE, verify the switch provides 802.3af power.
User questions about ProSafe WNDAP330 NETGEAR
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Access Point in PDF format for free! Find your manual ProSafe WNDAP330 - NETGEAR and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. ProSafe WNDAP330 by NETGEAR.
USER MANUAL ProSafe WNDAP330 NETGEAR
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : NETGEAR
Model : ProSafe WNDAP330
Category : Access Point