iOptron

GEM28 - Tripod iOptron - Free user manual and instructions

Find the device manual for free GEM28 iOptron in PDF.

📄 51 pages English EN Download 💬 AI Question 10 questions ⚙️ Specs
Notice iOptron GEM28 - page 5
Pick your language and provide your email: we'll send you a specifically translated version.
Product TypeStainless Steel Tripod
BrandiOptron
Model CompatibilityGEM28 Mount
MaterialStainless steel legs, aluminum spreader
Max Height111 cm (43.7 in)
Min Height79 cm (31.1 in)
Weight Capacity18 kg (39.7 lbs)
Leg Diameter38.1 mm (1.5 in)
Leg Sections2 sections with twist locks
Weight5.7 kg (12.5 lbs)
SpreaderIntegrated with accessory tray
Power SourceNone (fully manual)
MaintenanceWipe with dry cloth; tighten twist locks as needed
SafetyDo not exceed weight capacity; set up on level ground
Spare PartsLeg tips, spreader, screws available from iOptron
Warranty2 years limited

Frequently Asked Questions - GEM28 iOptron

How do I set up the iOptron GEM28 tripod?
Extend the legs to the desired height and tighten the twist locks. Spread the legs evenly and place the tripod on a stable, level surface. Attach the spreader/accessory tray at the base.
How do I level the tripod?
Use the built-in bubble level on the tripod head. Adjust the leg extensions individually until the bubble is centered in the circle.
What is the maximum payload of this tripod?
The tripod is rated for a maximum payload of 18 kg (39.7 lbs).
Can I use this tripod with other mounts?
Yes, the tripod features a standard 3/8-16 mounting screw, so it is compatible with most German equatorial mounts and alt-azimuth mounts.
How do I clean and maintain the tripod?
Wipe the legs and spreader with a dry, soft cloth after use. Periodically check and tighten all twist locks and screws. Do not use solvents or abrasive cleaners.
What should I do if the leg locks become loose?
Tighten the twist lock collars by turning them clockwise. If they continue to slip, contact iOptron support for replacement parts.
How do I replace the leg tips?
Unscrew the existing tips from the bottom of the legs. Screw on the new tips and tighten securely. Replacement tips are available from iOptron.
Is this tripod compatible with the iOptron GEM28 mount?
Yes, this tripod is specifically designed for use with the iOptron GEM28 mount and features mounting hardware compatible with the GEM28 base.
How much does the tripod weigh?
The tripod weighs approximately 5.7 kg (12.5 lbs).
Does the tripod come with a warranty?
Yes, the tripod is covered by a 2-year limited warranty from iOptron. Please register your product online for warranty support.

User questions about GEM28 iOptron

0 question about this device. Answer the ones you know or ask your own.

Ask a new question about this device

The email remains private: it is only used to notify you if someone responds to your question.

No questions yet. Be the first to ask one.

Download the instructions for your Tripod in PDF format for free! Find your manual GEM28 - iOptron and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. GEM28 by iOptron.

USER MANUAL GEM28 iOptron

Manual assistant
Powered by Anthropic
Waiting for your message
Product information

Brand : iOptron

Model : GEM28

Category : Tripod