E-flite

UMX Night Vapor - Remote control toy E-flite - Free user manual and instructions

Find the device manual for free UMX Night Vapor E-flite in PDF.

📄 16 pages English EN Download 💬 AI Question 10 questions ⚙️ Specs
Notice E-flite UMX Night Vapor - page 4
Pick your language and provide your email: we'll send you a specifically translated version.
Product Type Remote Control Airplane (Ultra Micro)
Brand E-flite
Model UMX Night Vapor
Category Remote Control Toy
Wingspan 15.6 in (396 mm)
Length 11.2 in (285 mm)
Flying Weight 0.88 oz (25 g)
Battery 1S 3.7V 150mAh Li-Po (included)
Motor Brushed outrunner
Receiver Integrated DSMX compatible
Servos Two micro servos (elevator, rudder)
Lighting Multi-colored LED lights for night flying
Control Range Up to 300 ft (91 m)
Recommended Transmitter Spektrum DSM2/DSMX (not included)
Charger USB charger included
Skill Level Beginner to intermediate
Assembly Minimal assembly required (pre-assembled)
Material EPP foam
Warranty 1 year limited warranty
Manual Languages English

Frequently Asked Questions - UMX Night Vapor E-flite

What battery does the UMX Night Vapor use?
It uses a 1S 3.7V 150mAh Li-Po battery, which is included with the aircraft.
How long is the flight time?
Flight time is approximately 8-10 minutes depending on throttle use and conditions.
Can I use any Spektrum transmitter?
It is compatible with Spektrum DSM2 and DSMX transmitters. Some older transmitters may require a module.
How do I bind the receiver?
Install the flight battery, then press and hold the bind button on the receiver while powering on the transmitter in bind mode. Release when the LEDs flash solid.
What are the LED colors?
The LEDs are multi-colored (red, green, blue, etc.) and can be controlled via the transmitter to create different patterns.
Is it suitable for indoor flying?
Yes, its lightweight design and slow flight characteristics make it ideal for indoor flying in gymnasiums or large rooms.
How to charge the battery?
Use the included USB charger. Connect the battery to the charger and plug into a USB port. Charging takes about 30-40 minutes. Never leave charging unattended.
What to do if the plane won't bind?
Ensure the transmitter and receiver are both in bind mode and within 3 feet of each other. Check battery voltage and try a different transmitter if available.
Can I replace the motor?
Yes, the motor is replaceable. E-flite offers a replacement brushed outrunner motor (part number EFLUMX905) that can be swapped with basic soldering skills.
Does it come fully assembled?
Yes, the aircraft comes pre-assembled. Only minimal setup is required, such as installing the battery and transmitter binding.

User questions about UMX Night Vapor E-flite

0 question about this device. Answer the ones you know or ask your own.

Ask a new question about this device

The email remains private: it is only used to notify you if someone responds to your question.

No questions yet. Be the first to ask one.

Download the instructions for your Remote control toy in PDF format for free! Find your manual UMX Night Vapor - E-flite and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. UMX Night Vapor by E-flite.

USER MANUAL UMX Night Vapor E-flite

Manual assistant
Powered by Anthropic
Waiting for your message
Product information

Brand : E-flite

Model : UMX Night Vapor

Category : Remote control toy