SH-201 - Synthesizer ROLAND - Free user manual and instructions
Find the device manual for free SH-201 ROLAND in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Virtual Analog Synthesizer |
| Keyboard | 49 keys (velocity and aftertouch sensitive) |
| Sound Engine | Virtual analog with 2 oscillators, 1 sub-oscillator, noise generator |
| Filters | 2 multi-mode filters (low-pass, band-pass, high-pass) |
| Effects | Reverb, delay, chorus, flanger, phaser, EQ, distortion |
| Arpeggiator | Built-in arpeggiator with 4 patterns |
| Sequencer | 16-step sequencer with 8 patterns |
| Polyphony | 10 voices |
| Dimensions (W x D x H) | 830 mm x 370 mm x 100 mm |
| Weight | 5.0 kg |
| Power Supply | AC adapter (9V DC, 1 A) |
| Power Consumption | 8 W |
| Connections | MIDI In/Out, USB, Audio Out (L/R), Headphones, Pedal |
| Maintenance | Wipe with a dry, soft cloth; avoid solvents or liquids |
| Safety | Keep away from moisture, heat, and direct sunlight |
| Spare Parts & Repairability | Contact Roland authorized service centers for genuine parts |
| General Information | Manufacturer: Roland; Model: SH-201; Category: Synthesizer |
Frequently Asked Questions - SH-201 ROLAND
How do I initialize the SH-201 to factory settings?
Turn off the unit. Press and hold the WRITE button while turning on the power. Continue holding until the display shows 'Init' then release.
Can I use the SH-201 without a computer?
Yes, the SH-201 is a standalone synthesizer. It can be used with an audio system or headphones. MIDI connections allow integration with other hardware.
How do I connect the SH-201 to a computer?
Connect the USB port to your computer. It will be recognized as a MIDI device. For audio, use the audio outputs connected to an audio interface.
Why is there no sound coming from my SH-201?
Check that the volume is turned up, headphones or speakers are connected, and the Main Out level is not at minimum. Also ensure a patch is selected and not muted.
How do I create a basic pad sound?
Select a patch with slow attack and release. Use two detuned sawtooth oscillators, apply a low-pass filter with moderate cutoff and envelope, and add reverb or chorus.
Can I layer two sounds on the SH-201?
The SH-201 does not support layer mode natively, but you can create a split by using the key range function in a patch, combining two tones across different note ranges.
How do I use the arpeggiator?
Press the ARPEGGIATOR button to enable. Select a pattern using the PATTERN knob. Adjust speed and range as desired. Play chords to hear the arpeggiated notes.
What type of power adapter does the SH-201 use?
It uses a 9V DC, 1 A power adapter with a center-positive plug. Use only Roland-approved adapters.
How can I save my own patches?
After editing, press WRITE. Use the cursor buttons to select a location (A/B bank, 1-8 per bank). Press WRITE again to confirm.
Does the SH-201 have aftertouch?
Yes, the keyboard is aftertouch sensitive. You can assign aftertouch to control modulation, filter cutoff, or other parameters in the patch settings.
User questions about SH-201 ROLAND
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Synthesizer in PDF format for free! Find your manual SH-201 - ROLAND and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. SH-201 by ROLAND.
USER MANUAL SH-201 ROLAND
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : ROLAND
Model : SH-201
Category : Synthesizer