V-Studio 100 - Mixer ROLAND - Free user manual and instructions
Find the device manual for free V-Studio 100 ROLAND in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Compact Digital Mixer / Recorder |
| Model | V-Studio 100 |
| Channels | 10 input channels (4 mono, 3 stereo) |
| Recording | Built-in SD card recorder (up to 32GB, WAV 16/24-bit, 44.1/48 kHz) |
| Effects | Built-in DSP effects: reverb, delay, chorus, flanger, etc. |
| Display | Backlit LCD screen for level metering and menu navigation |
| USB Connectivity | USB B port for audio streaming (2-in/2-out) and MIDI |
| MIDI | MIDI In/Out via 5-pin DIN |
| Phantom Power | +48V phantom power on mono inputs 1-4 |
| Power Supply | DC 9V 1A (AC adapter included) |
| Power Consumption | 8 W (typical) |
| Dimensions (W x D x H) | 310 x 210 x 60 mm |
| Weight | 1.6 kg |
| Headphone Output | 1/4" stereo jack, dedicated volume control |
| Monitor Output | RCA and 1/4" TRS stereo outputs |
| Main Outputs | XLR balanced (L/R) and 1/4" TRS |
| Built-in Tuner | Chromatic tuner for guitars, basses, etc. |
| Cleaning | Use a soft dry cloth; avoid solvents or abrasive cleaners |
| Maintenance | Keep SD card slot covered when not in use; update firmware via USB |
| Safety | Do not expose to rain or moisture; use only specified power adapter |
| Spare Parts & Repairability | Contact Roland authorized service center; user-replaceable SD card |
Frequently Asked Questions - V-Studio 100 ROLAND
How do I record audio to the SD card?
Insert a formatted SD card (up to 32GB, Class 4 or higher). Press the REC button on the recorder section; press PLAY to start recording, and press STOP to end. The recorded file is saved as a WAV file.
How do I connect the V-Studio 100 to a computer?
Use a standard USB cable (type B to type A) to connect the USB B port on the rear panel to your computer. Install the Roland driver if prompted. The mixer will appear as an audio and MIDI device.
What is the maximum SD card capacity supported?
The V-Studio 100 supports SD and SDHC cards up to 32 GB in capacity. For reliable recording, use a Class 4 or higher card.
How can I apply effects to a microphone input?
Press the EFFECTS button to enter the effects menu. Select the desired effect type (e.g., reverb) using the VALUE knob. Adjust the send level for the microphone channel by turning its EFX SEND knob.
Why is there no sound from the main outputs?
Check that the MAIN MIX fader is raised. Ensure the input channel faders are not at minimum. Verify that the channel mute buttons are not lit. Also check that the PHONES volume is adequate and the output cables are connected properly.
Can I use the V-Studio 100 as a standalone recorder without a computer?
Yes, the V-Studio 100 is designed as a standalone mixer/recorder. You can record directly to an SD card without any computer connection. The built-in recorder provides two-track recording of the main mix.
How do I reset the mixer to factory settings?
Turn off the power. Hold down the REC button while powering on the unit. Continue holding until the display shows 'Factory Reset'. Confirm by pressing ENTER. This erases all user settings.
Which microphones require phantom power?
Phantom power (+48V) is needed for most condenser microphones. Dynamic microphones (e.g., Shure SM58) do not require phantom power and are generally safe. Enable phantom power by pressing the PHANTOM button for channels 1-4.
How do I update the firmware?
Download the latest firmware from Roland's support website. Copy the firmware file to an SD card (root folder). Insert the card into the mixer, power off, then hold the MENU button while powering on. Follow on-screen instructions.
What maintenance does the V-Studio 100 require?
Keep the unit clean with a soft dry cloth. Avoid liquids and solvents. Protect the SD card slot from dust by keeping the cover closed when not in use. Periodically check for firmware updates to ensure optimal performance.
User questions about V-Studio 100 ROLAND
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Mixer in PDF format for free! Find your manual V-Studio 100 - ROLAND and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. V-Studio 100 by ROLAND.
USER MANUAL V-Studio 100 ROLAND
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : ROLAND
Model : V-Studio 100
Category : Mixer