WAX630 - Access Point NETGEAR - Free user manual and instructions
Find the device manual for free WAX630 NETGEAR in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Wireless Access Point |
| Brand | Netgear |
| Model | WAX630 |
| Wireless Standard | WiFi 6 (802.11ax) |
| Frequency Bands | Dual-band (2.4 GHz & 5 GHz) |
| Maximum Data Rate | Up to 1.2 Gbps (2.4 GHz) + 2.4 Gbps (5 GHz) |
| Ethernet Port | 1 x 2.5 Gigabit Ethernet (PoE+) |
| Power Method | PoE+ (802.3at) or 12V DC adapter |
| Dimensions (W x D x H) | 7.5 x 7.5 x 1.5 in (190 x 190 x 38 mm) |
| Weight | 1.5 lbs (0.68 kg) |
| Mounting | Wall or ceiling mountable |
| Antenna Type | Internal dual-band antennas |
| MU-MIMO | Yes (4x4 on 5 GHz, 2x2 on 2.4 GHz) |
| OFDMA | Yes |
| Security | WPA3, WPA2, 802.1X, MAC ACL |
| Management | Web GUI, CLI, Cloud via Insight |
| Operating Temperature | 0°C to 40°C (32°F to 104°F) |
| Humidity | 90% non-condensing |
| Maintenance | Clean with soft dry cloth, avoid liquids |
| Repairability | Not user-serviceable; no spare parts available |
Frequently Asked Questions - WAX630 NETGEAR
How do I set up the Netgear WAX630 access point?
Connect the access point to your network via PoE+ switch or injector. Use the default IP address (192.168.0.100) to access the web interface. Follow the setup wizard to configure SSID, security, and admin credentials.
Does the WAX630 support mesh networking?
Yes, when managed by a Netgear Insight controller or compatible router, multiple WAX630 units can form a mesh network for seamless roaming.
What is the maximum number of concurrent clients?
The WAX630 can support up to 256 concurrent clients, depending on network traffic and environment.
Can I use the WAX630 without a PoE switch?
Yes, an optional 12V DC power adapter (sold separately) can be used if PoE is not available.
How do I reset the WAX630 to factory defaults?
Press and hold the reset button on the back of the device for 10 seconds using a paperclip. The access point will reboot with factory settings.
What security protocols does the WAX630 support?
It supports WPA2-PSK, WPA3-SAE, WPA2-Enterprise (802.1X), and MAC address filtering for robust wireless security.
Can I mount the WAX630 on a wall or ceiling?
Yes, the access point includes mounting brackets for both wall and ceiling installation. Ensure the surface is sturdy and cables are properly routed.
How do I update the firmware on the WAX630?
Log into the web interface, go to Administration > Firmware Update. You can check for updates online or upload a manual firmware file.
What is the default username and password?
The default username is 'admin' and password is 'password'. It is strongly recommended to change these upon first login.
Does the WAX630 have a guest network feature?
Yes, you can create a separate guest SSID with isolated access, limiting guests to internet only and blocking local network resources.
User questions about WAX630 NETGEAR
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Access Point in PDF format for free! Find your manual WAX630 - NETGEAR and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. WAX630 by NETGEAR.
USER MANUAL WAX630 NETGEAR
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : NETGEAR
Model : WAX630
Category : Access Point