HyperFire 2 - Camera Reconyx - Free user manual and instructions
Find the device manual for free HyperFire 2 Reconyx in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Trail Camera |
| Brand | Reconyx |
| Model | HyperFire 2 |
| Dimensions | 14.0 cm x 8.9 cm x 6.4 cm (5.5" x 3.5" x 2.5") |
| Weight | 0.45 kg (1.0 lb) |
| Power Supply | 12 x AA batteries (NiMH or alkaline) |
| External Power | 6V DC external power jack |
| Battery Life | Up to 12 months with NiMH batteries (typical usage) |
| Detection Range | Up to 30 meters (100 ft) |
| Detection Angle | 48 degrees |
| Trigger Speed | 0.2 seconds |
| Recovery Time | 1 second |
| Flash Type | No-glow infrared (IR) LEDs |
| Flash Range | Up to 20 meters (65 ft) |
| Image Resolution | 12 MP (2048 x 1536) |
| Video Resolution | 1080p (1920 x 1080) at 30 fps |
| Storage Media | SD/SDHC card (up to 32 GB) |
| Time-Lapse Mode | Yes, user-customizable intervals |
| User Interface | Full-color 2.7" LCD screen |
| Data Tagging | Time, date, temperature, moon phase |
| Waterproof Rating | IP68 (submersible) |
| Operating Temperature | -25°C to 60°C (-13°F to 140°F) |
| Mounting | Strap or tripod mount (1/4-20 thread) |
| Maintenance | Clean lenses with soft cloth; check seals; replace batteries as needed |
| Safety | Do not immerse; use only recommended batteries; avoid direct sunlight on lens |
| Spare Parts & Repairability | Battery tray, mounting strap, IR lens; limited user repair; contact service |
Frequently Asked Questions - HyperFire 2 Reconyx
How many batteries does the HyperFire 2 use and what type?
The HyperFire 2 uses 12 AA batteries, either alkaline or NiMH rechargeable. NiMH is recommended for best performance and battery life.
What is the trigger speed of this camera?
The trigger speed is 0.2 seconds, which is very fast and helps capture quick-moving wildlife.
Can I use an external power source?
Yes, the camera has a 6V DC external power jack for connecting an optional external battery pack or solar panel.
What is the maximum SD card capacity?
The camera supports SD and SDHC cards up to 32 GB. For reliable performance, use a high-quality brand.
How do I set up time-lapse mode?
In the menu, select Time-Lapse and choose your desired interval (e.g., 1 minute, 5 minutes). The camera will take photos at that interval regardless of motion.
Is the HyperFire 2 waterproof?
Yes, it has an IP68 rating, meaning it is submersible up to 1 meter for 30 minutes. However, avoid submerging the power port without the seal cap.
How can I view the infrared flash? Is it visible to animals?
The flash uses no-glow IR LEDs that are invisible to both humans and animals, ensuring no disturbance.
What information is stamped on photos?
Photos include time, date, temperature, and moon phase. You can customize the display in settings.
How do I clean the camera lens?
Use a soft, lint-free cloth to gently wipe the lens. Do not use harsh chemicals or abrasive materials.
Where can I purchase replacement parts?
Replacement parts such as battery trays and mounting straps are available from Reconyx authorized dealers or directly through their support.
User questions about HyperFire 2 Reconyx
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Camera in PDF format for free! Find your manual HyperFire 2 - Reconyx and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. HyperFire 2 by Reconyx.
USER MANUAL HyperFire 2 Reconyx
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Reconyx
Model : HyperFire 2
Category : Camera