E.POWER - Uncategorized Renogy - Free user manual and instructions
Find the device manual for free E.POWER Renogy in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Portable Power Station |
| Brand | Renogy |
| Model | E.POWER |
| Dimensions | 11.8 x 7.5 x 8.3 inches |
| Weight | 16.5 lbs (7.5 kg) |
| Battery Type | Lithium Iron Phosphate (LiFePO4) |
| Battery Capacity | 500 Wh |
| AC Output (Pure Sine Wave) | 500W continuous, 1000W surge |
| AC Outlets | 2 x 120V |
| USB Outputs | 2 x USB-A (5V/2.4A), 1 x USB-C (PD 60W) |
| DC Output | 2 x 12V/3A, 1 x Cigarette lighter |
| Solar Input | 12-24V, 100W max via MC4 connector |
| AC Charging | 100-240V, 50/60Hz |
| Charging Time (AC) | 6-7 hours |
| Display | LCD screen showing battery level, input/output power |
| Operating Temperature | 32°F to 104°F (0°C to 40°C) |
| Safety Features | Overload, short-circuit, over-temperature, over-discharge protection |
| Maintenance | Keep dry, clean with soft cloth, store at 50% charge if unused |
| Warranty | 1 year limited |
| Included Accessories | AC charger, car charging cable, MC4 solar cable, manual |
Frequently Asked Questions - E.POWER Renogy
Can I charge the E.POWER while using it?
Yes, you can use pass-through charging. The unit can charge from AC or solar while simultaneously powering your devices.
What solar panel can I use with this device?
You can use any 12-24V solar panel with a maximum power of 100W and MC4 connectors. Renogy recommends using a Renogy 100W solar panel for optimal performance.
How long does the battery last?
Battery life depends on the load. For example, a 50W device will run for about 10 hours (500Wh / 50W approx). Actual runtime may vary due to conversion losses.
What can I power with 500W?
You can power small appliances like a laptop (60W), LED lights (10W), a mini fridge (80W), a CPAP machine (30W), or a TV (100W). Surge capacity up to 1000W allows starting some motor-driven devices.
Is the output pure sine wave?
Yes, the AC output is pure sine wave, which is safe for sensitive electronics like laptops, medical equipment, and audio gear.
How do I reset the unit after overload?
Disconnect the load causing overload, turn off the unit, wait 10 seconds, then turn it back on. If problem persists, check for short circuits.
Can I use it while charging?
Yes, the E.POWER supports pass-through charging, allowing simultaneous charging and discharging. However, it may slow down charging speed.
What does the LCD display show?
The LCD shows remaining battery percentage, input power (from solar or AC), output power, and estimated remaining run time.
Is the battery replaceable?
No, the battery is integrated and not user-replaceable. Please contact Renogy support for battery service or disposal.
Can I take the E.POWER on an airplane?
No, due to the lithium battery capacity (500Wh), it exceeds the 100Wh limit for air travel and cannot be taken in carry-on or checked baggage.
User questions about E.POWER Renogy
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Uncategorized in PDF format for free! Find your manual E.POWER - Renogy and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. E.POWER by Renogy.