Powernode N330 - Hi-Fi System Bluesound - Free user manual and instructions
Find the device manual for free Powernode N330 Bluesound in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Streaming Amplifier / Hi-Fi System |
| Model | Powernode N330 |
| Dimensions (W x H x D) | 220 x 66 x 190 mm (8.7 x 2.6 x 7.5 in) |
| Weight | 2.1 kg (4.6 lbs) |
| Power Output | 2 x 80W (8 Ohms) |
| Inputs | HDMI eARC, Optical, Coaxial, RCA analog, USB-A, Ethernet |
| Outputs | Speaker terminals, Subwoofer pre-out, Headphone jack |
| Wireless Connectivity | Wi-Fi 5 (802.11ac), Bluetooth 5.0 aptX HD |
| Streaming Services | AirPlay 2, Spotify Connect, Tidal, Amazon Music, Deezer, Qobuz, Internet Radio |
| Supported Audio Formats | MP3, AAC, WMA, OGG, WAV, FLAC, AIFF, ALAC, DSD, MQA |
| DAC | 32-bit / 192kHz (Burr-Brown) |
| Network | Ethernet 10/100, Wi-Fi 5 |
| Bluetooth Version | 5.0 with aptX HD |
| Power Supply | 100-240V AC, 50/60Hz |
| Power Consumption | 30 W (typical), < 2 W standby |
| Remote Control | Yes, IR remote included |
| Multi-Room | BluOS ecosystem for multi-room audio |
| Firmware Upgrade | Automatic over Wi-Fi or Ethernet |
| Color | Black |
| In the Box | Powernode N330, Power cord, Ethernet cable, Optical cable, Quick Start Guide, Safety leaflet |
| Cleaning and Maintenance | Wipe with a soft, dry cloth. Do not use liquids or aerosols. |
| Safety | Do not expose to water, heat sources, or obstruct ventilation. Use only supplied power cord. |
| Repairability / Spare Parts | Contact authorized Bluesound service center for repairs. No user-serviceable parts inside. |
Frequently Asked Questions - Powernode N330 Bluesound
How do I connect the Powernode N330 to my Wi-Fi network?
Use the BluOS Controller app on your smartphone or tablet. Follow the in-app setup wizard to connect to your Wi-Fi network.
What Hi-Res audio formats are supported?
Supports FLAC, ALAC, WAV, AIFF, DSD, MQA up to 24-bit/192kHz.
Can I use the Powernode N330 as a Bluetooth speaker?
Yes, it supports Bluetooth 5.0 with aptX HD. Switch to Bluetooth input via the app or remote.
How do I perform a factory reset?
Press and hold the Reset button on the rear panel (next to Ethernet port) for 10 seconds until the front LED flashes red.
Can I connect a subwoofer?
Yes, use the Subwoofer pre-out on the rear panel. Connect a powered subwoofer with a standard RCA cable.
How to update firmware?
Firmware updates are automatic via the BluOS app when connected to the internet. Ensure the device stays powered on during update.
What to do if there is no sound?
Check input source in the app, ensure speakers are connected correctly, and volume is not muted. Try a different source or restart the device.
Can I use the Powernode N330 with a TV?
Yes, connect via HDMI eARC for best quality. Also supports optical and coaxial inputs from TVs.
How to set up multi-room audio?
Use the BluOS Controller app to group multiple Bluesound devices. Choose which speakers play together in the Groups section.
How to clean the device?
Wipe the exterior with a soft, dry cloth. Do not use any liquids, abrasives, or solvents.
User questions about Powernode N330 Bluesound
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Hi-Fi System in PDF format for free! Find your manual Powernode N330 - Bluesound and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. Powernode N330 by Bluesound.
USER MANUAL Powernode N330 Bluesound
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Bluesound
Model : Powernode N330
Category : Hi-Fi System