DS-7632NXI-K2 - VCR Hikvision - Free user manual and instructions
Find the device manual for free DS-7632NXI-K2 Hikvision in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Network Video Recorder (NVR) |
| Brand | Hikvision |
| Model | DS-7632NXI-K2 |
| Video Channels | 32 |
| Video Compression | H.265+/H.265/H.264+/H.264 |
| Recording Resolution | Up to 12 MP |
| Hard Drive Bays | 2 SATA (up to 10 TB each) |
| Audio | 1 input, 1 output |
| Alarm I/O | 8 inputs, 4 outputs |
| Network Interface | 1 Gigabit Ethernet |
| Dimensions (W×D×H) | 445 × 400 × 45 mm |
| Weight | Approx. 4.5 kg (without HDD) |
| Power Supply | 48 V DC, 1.5 A |
| Power Consumption | ≤ 30 W (without HDD) |
| Operating Temperature | -10°C to 55°C |
| Main Features | AcuSense, smart search, ANR, dual-stream |
| Maintenance | Clean with dry cloth; avoid liquids |
| Safety | CE, FCC, UL listed |
| Spare Parts / Repairability | Contact Hikvision support for spare parts |
Frequently Asked Questions - DS-7632NXI-K2 Hikvision
How do I connect cameras to the DS-7632NXI-K2?
Use PoE switches or connect directly to the NVR's internal PoE ports (if available). Otherwise, connect cameras to the same network as the NVR and add them via the Camera Management interface.
What is AcuSense technology?
AcuSense uses deep learning algorithms to distinguish between human/vehicle targets and false alarms. It reduces unnecessary recordings and alerts.
How do I set up motion detection recording?
Go to Storage > Schedule, select a camera, enable motion detection, and set the recording schedule. Then under Event, configure motion detection parameters.
Can I access the NVR remotely?
Yes, enable DDNS or use Hik-Connect app. Forward ports 8000 (TCP) and 554 (RTSP) on your router, then add the NVR in the app via serial number.
What hard drives are compatible?
Use surveillance-grade HDDs (e.g., WD Purple, Seagate SkyHawk) with SATA interface. Maximum capacity per bay is 10 TB.
How do I update firmware?
Download the latest firmware from Hikvision website. Go to System > Maintenance > Firmware Update and upload the .dav file.
What is the default IP address and login?
Default IP: 192.168.1.64. Username: admin. Password: admin (change on first login). To find the NVR on your network, use SADP tool.
How do I enable audio recording?
Connect an audio source to the audio input. In camera settings, enable Audio for the channel. Ensure the camera supports audio.
What is the maximum recording resolution?
The NVR supports up to 12 MP resolution per channel, but actual resolution depends on the connected camera.
How do I reset the NVR to factory settings?
Press and hold the Reset button on the rear panel for 10 seconds while powered on. Alternatively, go to System > Maintenance > Factory Default.
User questions about DS-7632NXI-K2 Hikvision
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your VCR in PDF format for free! Find your manual DS-7632NXI-K2 - Hikvision and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. DS-7632NXI-K2 by Hikvision.
USER MANUAL DS-7632NXI-K2 Hikvision
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Hikvision
Model : DS-7632NXI-K2
Category : VCR