Force SD1005 - Fitness Equipment True - Free user manual and instructions
Find the device manual for free Force SD1005 True in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Treadmill |
| Brand | True |
| Model | Force SD1005 |
| Motor Power | 3.0 HP Continuous |
| Speed Range | 0.5 - 20 km/h |
| Incline Range | 0 - 15% |
| Running Surface | 150 x 50 cm |
| Foldable | Yes, with hydraulic assist |
| Display Type | LCD with backlight |
| Display Metrics | Time, distance, speed, calories, pulse |
| Heart Rate Monitor | Hand grip sensors and chest strap compatible |
| Programs | 12 preset programs |
| User Weight Limit | 150 kg |
| Product Dimensions | 200 x 80 x 140 cm |
| Folded Dimensions | 100 x 80 x 160 cm |
| Product Weight | 100 kg |
| Max User Height | 200 cm |
| Power Supply | 220-240V, 50/60Hz |
| Safety Key | Included |
| Warranty | 2 years on motor, 1 year on parts |
| Maintenance | Lubricate belt every 3 months |
| Spare Parts Available | Yes, via True customer service |
| Manual Language | English (EN) |
| Manual Pages | 48 |
Frequently Asked Questions - Force SD1005 True
How do I assemble the treadmill?
Refer to the user manual included in the package. The assembly is straightforward: attach the upright posts, console, and side rails. Ensure all bolts are tightened securely before use.
How do I lubricate the belt?
Use a silicone-based lubricant every 3 months or after 150 km of use. Lift the belt edges, apply lubricant evenly, and run the treadmill at low speed for 2 minutes.
What does error code E1 mean?
Error E1 indicates a motor overload. Check if the belt is too tight or if there is excessive friction. Reduce speed and incline, and lubricate if needed. If persists, contact support.
How to fold and store the treadmill?
Ensure the treadmill is off and unplugged. Lift the deck until the locking mechanism engages. To unfold, gently press the release lever and lower the deck. Store in a dry place.
Can I use a chest strap heart rate monitor?
Yes, the Force SD1005 is compatible with chest strap monitors using a 5 kHz signal. Pair the strap with the console for accurate heart rate tracking.
The treadmill stops suddenly, what to do?
First, check the safety key is properly inserted. If it stops during use, wait 10 seconds and press Start. If problem persists, inspect the power cord and outlet.
How to adjust the belt tension?
Use the adjustment bolts at the rear roller. Turn both bolts equally clockwise to tighten, counterclockwise to loosen. Belt should lift about 5-7 cm from the deck.
What is the weight limit?
The maximum user weight is 150 kg (330 lbs). Exceeding this limit may cause damage or injury.
How to clean the treadmill?
Wipe the console and frame with a damp cloth and mild detergent. Do not use solvents. Vacuum under the belt regularly to remove dust.
Where can I find spare parts?
Contact True customer service or visit the official website. Provide the model number Force SD1005 to order parts like belts, motors, or console components.
User questions about Force SD1005 True
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Fitness Equipment in PDF format for free! Find your manual Force SD1005 - True and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. Force SD1005 by True.
USER MANUAL Force SD1005 True
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : True
Model : Force SD1005
Category : Fitness Equipment