Vigor 2866Vac - Router Draytek - Free user manual and instructions
Find the device manual for free Vigor 2866Vac Draytek in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Dual-WAN VPN Router with VDSL2/ADSL2+ Modem and Wireless AC |
| Model | Vigor 2866Vac |
| Brand | Draytek |
| Dimensions | 240 mm x 165 mm x 40 mm (9.45 x 6.50 x 1.57 inches) |
| Weight | Approximately 0.65 kg (1.43 lbs) |
| Power Supply | DC 12V, 2A external power adapter |
| Power Consumption | Max 15 watts |
| Ethernet Ports | 1x Gigabit WAN, 4x Gigabit LAN |
| DSL Port | VDSL2/ADSL2+ (RJ-11) |
| USB Ports | 1x USB 2.0, 1x USB 3.0 |
| Wireless Standard | IEEE 802.11ac (dual-band, 2.4GHz + 5GHz) |
| Maximum Wireless Speed | Up to 867 Mbps on 5GHz, up to 300 Mbps on 2.4GHz |
| VPN Support | IPsec, OpenVPN, PPTP, L2TP with up to 50 concurrent tunnels |
| Firewall Features | SPI, DoS/DDoS prevention, content filtering, VPN pass-through |
| Load Balancing | Yes, with WAN failover and policy-based routing |
| Maintenance | Keep device clean and dust-free; update firmware via web interface |
| Safety Instructions | Place in ventilated area; avoid water and extreme temperatures |
| Spare Parts & Repairability | Power adapter available; device not user-serviceable; contact support |
| General Information | Warranty: 2 years; Certifications: CE, FCC |
Frequently Asked Questions - Vigor 2866Vac Draytek
How do I set up my Draytek Vigor 2866Vac router for the first time?
Connect the power adapter and DSL cable. Use an Ethernet cable to connect your computer to a LAN port. Open a browser and go to 192.168.1.1. Log in with default username admin and password admin. Follow the Quick Start Wizard.
How do I configure a VPN on the Vigor 2866Vac?
Go to VPN and Remote Access > VPN Profiles. Select protocol (e.g., IPsec or OpenVPN). Enter remote gateway and authentication details. Apply settings and test the connection.
How to reset the router to factory defaults?
Press and hold the Factory Reset button on the rear panel for about 10 seconds until the PWR LED blinks. The router will reboot with default settings.
What should I do if I forgot the login password?
Perform a factory reset as described above. This will erase all settings and restore default username admin and password admin.
How can I improve the wireless signal range?
Place the router centrally and high up. Avoid obstructions and interference from other electronics. Adjust antennas. In the web interface, under Wireless LAN, select a clear channel and enable 802.11n/ac modes.
How do I update the firmware?
Download the latest firmware from Draytek’s website. Log into the router, go to System Maintenance > Firmware Upgrade. Select the file and click Upgrade. Do not power off during update.
Why is my DSL connection not syncing?
Check the DSL cable connection. Ensure microfilters are installed on phone lines. Verify that your ISP supports VDSL2/ADSL2+. Log into the router and check DSL Status for error messages.
How do I set up load balancing with two WAN connections?
Go to WAN > Load Balancing. Configure both WAN interfaces (e.g., DSL and Ethernet). Set a balancing policy (e.g., by session or traffic). Save and apply.
Can I use the Vigor 2866Vac as a wired router only?
Yes, you can disable wireless by going to Wireless LAN > General Setup and unchecking Wireless Enable. The router will function purely via Ethernet ports.
What is the default IP address and how to change it?
Default IP is 192.168.1.1. To change, go to LAN > General Setup and modify the IP Address field. Save and reboot. Remember to use the new IP to access the router.
User questions about Vigor 2866Vac Draytek
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Router in PDF format for free! Find your manual Vigor 2866Vac - Draytek and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. Vigor 2866Vac by Draytek.