PMAX-1011 - Uncategorized ACTi - Free user manual and instructions
Find the device manual for free PMAX-1011 ACTi in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | IP Security Camera |
| Model | PMAX-1011 |
| Image Sensor | 1/2.8" Progressive Scan CMOS |
| Resolution | 1920 x 1080 (2 MP) |
| Lens | Fixed focal, 4 mm, F2.0 |
| Field of View | Horizontal: 80°, Vertical: 45° |
| Minimum Illumination | Color: 0.05 lux, B/W: 0.01 lux |
| Night Vision | IR LEDs, up to 20 m |
| Video Compression | H.265, H.264 |
| Frame Rate | 30 fps at 1080p |
| Audio | One-way audio (built-in microphone) |
| Network Interface | RJ-45 10/100 Base-T |
| Power Supply | PoE (802.3af) or DC 12V |
| Power Consumption | Max 7 W |
| Dimensions (W x H x D) | 70 x 70 x 150 mm |
| Weight | Approx. 500 g |
| Ingress Protection | IP66 (weather resistant) |
| Operating Temperature | -30°C to 60°C |
| Main Functions | Motion detection, tampering alarm, privacy mask, ONVIF support |
| Maintenance | Clean lens with soft dry cloth; avoid solvents |
| Safety Precautions | Use only certified PoE or DC adapter; do not expose to moisture |
| Spare Parts / Repairability | Refer to user manual for parts; contact authorized service |
Frequently Asked Questions - PMAX-1011 ACTi
How do I install the ACTi PMAX-1011 camera?
Mount the camera using the provided bracket. Connect the Ethernet cable for PoE power and network. Adjust the angle and tighten the screws. Refer to the manual for detailed steps.
How can I view the camera feed remotely?
Use the ACTi software (e.g., ACTi Camera Finder) or your web browser. Enter the camera's IP address. Default credentials are usually admin/admin. Ensure your network allows remote access.
What should I do if the camera is not showing video?
Check the Ethernet connection and PoE power. Verify that the camera's IP is accessible from your computer. Try restarting the camera. If using a switch, ensure PoE is enabled.
Does the PMAX-1011 support night vision?
Yes, it has built-in IR LEDs with a range of up to 20 meters. The camera automatically switches to black-and-white mode in low light.
Can I use this camera outdoors?
Yes, the camera is rated IP66, meaning it is weather-resistant and suitable for outdoor use. Ensure the cable connections are sealed.
How do I reset the camera to factory defaults?
Locate the reset button on the camera (usually a small hole). Press and hold it for 10 seconds with a paperclip while the camera is powered on. The camera will reboot with default settings.
Is the camera compatible with third-party software?
Yes, it supports the ONVIF standard (Profile S), so it works with many VMS software like Blue Iris, Milestone, etc.
What power supply do I need?
The camera can be powered via PoE (802.3af) or a DC 12V adapter (not included). The power consumption is up to 7W.
How do I clean the camera lens?
Use a soft, lint-free cloth slightly dampened with water or lens cleaner. Gently wipe the lens in circular motions. Avoid abrasive materials.
Where can I find the latest firmware?
Visit the ACTi support website at www.acti.com and search for PMAX-1011. Download the firmware file and follow the update instructions in the manual.
User questions about PMAX-1011 ACTi
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Uncategorized in PDF format for free! Find your manual PMAX-1011 - ACTi and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. PMAX-1011 by ACTi.
USER MANUAL PMAX-1011 ACTi
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : ACTi
Model : PMAX-1011
Category : Uncategorized