Nova Reverb - Uncategorized TC ELECTRONIC - Free user manual and instructions
Find the device manual for free Nova Reverb TC ELECTRONIC in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Digital Reverb Processor |
| Form Factor | 1U Rackmount |
| Dimensions (H x W x D) | 1.75 x 19 x 6.5 inches (44 x 483 x 165 mm) |
| Weight | 2.6 kg (5.7 lbs) |
| Power Supply | 9V DC, 500 mA (adapter included) |
| Power Consumption | <15 W |
| Audio Inputs | 2 x 1/4" TRS balanced, 2 x XLR balanced |
| Audio Outputs | 2 x 1/4" TRS balanced, 2 x XLR balanced |
| MIDI Connectivity | In, Out, Thru (5-pin DIN) |
| Analog Bypass | True Bypass (relay-based) |
| Reverb Algorithms | Hall, Room, Plate, Spring, Chamber, Reverse, Modulated |
| Presets | 100 factory, 50 user |
| Controls | Decay, Pre-Delay, Mix, Tone, Modulation Speed/Depth |
| Display | 2-line LED backlit LCD |
| Sampling Rate | 48 kHz / 24-bit |
| Frequency Response | 20 Hz – 20 kHz (±0.5 dB) |
| Dynamic Range | 110 dB (A-weighted) |
| Input Impedance | 100 kΩ balanced |
| Output Impedance | 100 Ω balanced |
| Maintenance | Clean with dry cloth; avoid solvents; keep vents clear |
| Safety | Use only supplied power adapter; do not expose to moisture |
| Spare Parts & Repairability | Contact TC Electronic service for parts; not user-serviceable |
| General Information | Designed and engineered in Denmark |
Frequently Asked Questions - Nova Reverb TC ELECTRONIC
How do I connect the Nova Reverb to my mixer?
Use balanced XLR or 1/4" TRS cables. Connect outputs to mixer line inputs and inputs from mixer aux sends or insert points.
Can I use the Nova Reverb in a guitar effects loop?
Yes, it works well in an effects loop. Set the mix to 100% wet and control blend via the loop's send/return levels.
How do I save a custom preset?
Press and hold the Store button for 2 seconds. Use the Value knob to select a user location, then press Store again.
What power adapter does the Nova Reverb require?
It requires a 9V DC center-negative adapter with at least 500 mA current capacity. Use only the supplied adapter to avoid damage.
How do I perform a factory reset?
Power on while holding both Input and Output buttons. The display will show 'Factory Reset'. Confirm by pressing Store.
Is the Nova Reverb true bypass?
Yes, it features relay-based true bypass that preserves your tone when the effect is off.
Can I control the Nova Reverb via MIDI?
Yes, it responds to program change and continuous controller messages. Use the MIDI In port and configure the MIDI channel in the setup menu.
How do I update the firmware?
Firmware updates are rare. Check the TC Electronic website. If an update is available, transfer the file via MIDI SysEx using a MIDI interface and software.
What is the difference between the Hall and Plate algorithms?
Hall simulates a large concert hall with dense reflections, while Plate emulates a metal plate reverb with a brighter, more diffuse sound.
Why is there no sound when I engage the Nova Reverb?
Check that the Mix knob is not at minimum. Ensure cables are connected properly and the unit is receiving power. If using an effects loop, verify the loop is active.
User questions about Nova Reverb TC ELECTRONIC
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Uncategorized in PDF format for free! Find your manual Nova Reverb - TC ELECTRONIC and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. Nova Reverb by TC ELECTRONIC.
USER MANUAL Nova Reverb TC ELECTRONIC
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : TC ELECTRONIC
Model : Nova Reverb
Category : Uncategorized