XP8103 - Remote control toy JR - Free user manual and instructions
Find the device manual for free XP8103 JR in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Brand | JR |
| Model | XP8103 |
| Product Type | Radio Control Transmitter |
| Dimensions (W x H x D) | 18 x 10 x 6 cm |
| Weight | 300 g |
| Power Source | Rechargeable NiMH battery (9.6V 600mAh) |
| Frequency | 2.4 GHz |
| Modulation | FHSS |
| Number of Channels | 10 |
| Control Range | Up to 1 km (line of sight) |
| Display | Backlit LCD with programming menus |
| Memory | 10 model memory slots |
| Training Mode | Yes (Master/Slave) |
| Programming Features | Dual rates, exponential, servo reversing, sub-trim, travel adjust |
| Maintenance | Clean with dry, soft cloth. Avoid moisture. |
| Safety Precautions | Keep away from water and extreme temperatures. Do not disassemble. |
| Repairability | Replacement parts available; service via authorized JR dealers. |
| Warranty | 1 year limited warranty |
Frequently Asked Questions - XP8103 JR
How do I bind the XP8103 transmitter to a receiver?
Turn on the transmitter, then the receiver. Press and hold the bind button on the receiver until the LED flashes. The transmitter will automatically bind within a few seconds.
What type of battery does the XP8103 use?
It uses a 9.6V 600mAh NiMH rechargeable battery pack. You can also use 8 x AA alkaline batteries in the battery tray.
How long does the battery last on a full charge?
A fully charged NiMH battery provides approximately 4-6 hours of continuous use, depending on transmitter settings and usage.
Can I use the XP8103 with other brands of receivers?
The XP8103 uses JR 2.4GHz FHSS protocol. It is compatible with JR and Spektrum DSM2/DSMX receivers with the appropriate module or native compatibility.
How do I set up dual rates and exponential?
Press the Menu button, navigate to D/R & Expo, select the channel, and adjust the percentage for dual rates (e.g., 70%) and exponential (e.g., 30%) using the +/- buttons.
What does the training mode do?
Training mode allows a master transmitter (instructor) to control the model while a slave transmitter (student) is connected. The instructor can override control with a switch.
How do I replace the antenna?
The antenna is fixed and not user-replaceable. If damaged, contact JR service for repair. Do not attempt to replace it yourself as it may affect performance.
Why is the transmitter not turning on?
Check that the battery is charged or installed correctly. Ensure the power switch is in the ON position. If still not working, try a fresh set of alkaline batteries.
Can I use the XP8103 for drones?
Yes, if the drone uses a compatible receiver. However, the XP8103 is primarily designed for fixed-wing models and helicopters. For drones, ensure the receiver supports the required channels.
How do I reset the transmitter to factory settings?
Go to the System Menu, select Factory Reset, and confirm. This will erase all model memories and settings. Back up your models before resetting.
User questions about XP8103 JR
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Remote control toy in PDF format for free! Find your manual XP8103 - JR and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. XP8103 by JR.
USER MANUAL XP8103 JR
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : JR
Model : XP8103
Category : Remote control toy