H16 SB - Camcorder BOLEX - Free user manual and instructions
Find the device manual for free H16 SB BOLEX in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | 16mm Film Movie Camera |
| Brand | Bolex |
| Model | H16 SB |
| Film Format | 16mm |
| Film Capacity | 100 ft (30 m) spools |
| Lens Mount | C-mount |
| Shutter | Variable, 135-160 degrees |
| Frame Rates | 12, 16, 18, 24, 32, 48 fps |
| Power Source | Spring motor (clockwork) or optional electric motor |
| Viewfinder | Reflex with ground glass |
| Dimensions (approx) | 200 x 100 x 150 mm |
| Weight (approx) | 2.5 kg |
| Construction | Metal body |
| Maintenance | Clean lens and film gate regularly; lubricate moving parts as needed |
| Safety | Keep away from moisture; use proper film handling |
| Spare Parts | Available from specialty dealers |
| Manual Language | English |
| Manual Pages | 52 |
Frequently Asked Questions - H16 SB BOLEX
How do I load film into the Bolex H16 SB?
Open the camera door, place the film spool on the upper spindle, thread the film through the gate and onto the take-up spool. Close the door and advance the film using the winding knob. Refer to the manual for detailed diagrams.
What type of batteries does the Bolex H16 SB use?
The Bolex H16 SB is primarily spring-powered. If using an optional electric motor, it typically requires a 12V DC battery pack or a specific adapter. Check the motor's manual for exact requirements.
How do I clean the lens of my Bolex H16 SB?
Use a soft brush or compressed air to remove dust. For smudges, apply lens cleaning solution to a microfiber cloth and wipe gently. Never use paper towels or abrasive materials.
Why is my Bolex H16 SB not advancing film?
Possible causes: the spring motor is not wound fully, the film is loaded incorrectly, or the film gate is jammed. Try re-winding the spring and check the film path. If the issue persists, consult a technician.
Can I use modern film in the Bolex H16 SB?
Yes, modern 16mm film on 100 ft spools is compatible. Ensure you use film with standard perforations. Color negative or reversal films work well. Adjust exposure settings according to film speed.
How do I adjust the shutter speed?
The shutter speed is adjusted by rotating the shutter dial on the camera body. Typical settings range from 1/30 to 1/1000 second depending on frame rate and shutter angle. Refer to the manual for exact steps.
What is the best way to store the camera?
Store the Bolex H16 SB in a cool, dry place away from direct sunlight. Release the spring motor before storage to prevent tension. Keep the lens cap on and place the camera in a padded case.
How do I set the frame rate?
Locate the frame rate selector on the camera body. Rotate it to the desired speed (e.g., 24 fps for sound films). Ensure the spring is wound sufficiently to maintain consistent speed.
Is the Bolex H16 SB compatible with electric motors?
Yes, an optional electric motor can be attached to the camera's drive socket. This allows longer continuous shooting without rewinding the spring. Follow the motor's installation instructions carefully.
Where can I find spare parts?
Spare parts for the Bolex H16 SB can be found through specialty camera repair shops, online marketplaces like eBay, or from dedicated Bolex collectors. Always ensure parts are authentic or compatible.
User questions about H16 SB BOLEX
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Camcorder in PDF format for free! Find your manual H16 SB - BOLEX and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. H16 SB by BOLEX.
USER MANUAL H16 SB BOLEX
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : BOLEX
Model : H16 SB
Category : Camcorder