UDX-4K40 - Projector Barco - Free user manual and instructions
Find the device manual for free UDX-4K40 Barco in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Type de produit | Projecteur professionnel |
| Marque | Barco |
| Modèle | UDX-4K40 |
| Résolution native | 4K UHD (3840 x 2160 pixels) |
| Luminosité | 40 000 lumens |
| Source lumineuse | Laser phosphore |
| Rapport de contraste | 2000:1 |
| Lentilles compatibles | Série TLD+ (zoom et focus motorisés) |
| Correction géométrique | Warping et blending intégrés |
| Alimentation | 100-240 V AC, 50/60 Hz |
| Consommation électrique | 3200 W (typique) |
| Poids | 75 kg (sans lentille) |
| Dimensions (L x P x H) | 700 x 500 x 300 mm |
| Entrées vidéo | HDMI 2.0, DisplayPort, 3G-SDI, HDBaseT |
| Contrôle | Ethernet (RJ45), RS232, IR, Wi-Fi (en option) |
| Niveau sonore | 48 dB(A) (typique) |
| Température de fonctionnement | 0 à 40 °C |
| Entretien | Nettoyage filtre à air toutes les 500 heures; lentille avec chiffon microfibre |
| Sécurité | Verrouillage Kensington, arrêt d'urgence, sécurité laser classe 1 |
| Pièces détachées | Lentilles, lampes laser (module), filtres, alimentation |
| Réparabilité | Modules remplaçables sur site |
Frequently Asked Questions - UDX-4K40 Barco
How do I clean the projector lens?
Use a soft, lint-free microfiber cloth slightly dampened with lens cleaning solution. Gently wipe in a circular motion. Do not spray liquid directly on the lens.
What is the recommended ambient temperature for operation?
The recommended ambient temperature is between 0°C and 40°C. Ensure proper ventilation to avoid overheating.
How often should I replace the air filter?
Clean the air filter every 500 hours of use. Replace it if damaged or after 3000 hours, depending on dust conditions.
Can I use the projector in portrait mode?
Yes, the UDX-4K40 supports portrait orientation. Ensure the projector is properly secured and the cooling system is not obstructed.
What is the expected lifespan of the laser light source?
The laser phosphor light source is rated for up to 30,000 hours in normal operation, reducing maintenance costs.
How do I adjust the focus and zoom?
Use the motorized lens adjustment via the remote control, OSD menu, or the buttons on the projector. Ensure the lens is unlocked before adjustment.
What type of HDMI cable should I use for 4K content?
Use a High Speed HDMI 2.0 cable or better to support 4K at 60Hz. For longer distances, consider HDBaseT or fiber optic solutions.
Is the projector compatible with 3D content?
Yes, the projector supports 3D via HDMI 1.4a with compatible 3D glasses (optional accessory). Check the manual for supported formats.
How do I perform a factory reset?
Go to the OSD menu: Settings > System > Factory Reset. Confirm the action to restore default settings.
What does the alarm LED indicate?
A flashing red or orange LED indicates a fault. Common causes: over-temperature, fan failure, or laser error. Check the status message on screen or in the log.
User questions about UDX-4K40 Barco
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Projector in PDF format for free! Find your manual UDX-4K40 - Barco and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. UDX-4K40 by Barco.
USER MANUAL UDX-4K40 Barco
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Barco
Model : UDX-4K40
Category : Projector