PLX100E - Heating DIMPLEX - Free user manual and instructions
Find the device manual for free PLX100E DIMPLEX in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Electric Panel Heater |
| Model | PLX100E |
| Brand | Dimplex |
| Power Output | 1000 W |
| Heating Method | Convection |
| Power Supply | 220-240 V ~ 50 Hz |
| Dimensions (W x H x D) | 600 x 450 x 100 mm |
| Weight | 5.5 kg |
| Mounting | Wall-mounted or freestanding with feet |
| Thermostat | Adjustable mechanical thermostat |
| Heat Settings | 2 power levels (low/high) |
| Safety Features | Overheat protection, tip-over switch |
| Control Type | Rotary dial |
| Indoor Use Only | Yes |
| Includes | Wall brackets, feet, user manual |
| Cleaning | Wipe with dry cloth; do not use water or abrasives |
| Spare Parts Availability | Authorized service centers for genuine parts |
| Warranty | 2 years (subject to terms) |
Frequently Asked Questions - PLX100E DIMPLEX
How do I reset the overheat protection on my Dimplex PLX100E?
Unplug the heater and allow it to cool down for at least 30 minutes. The overheat protection will automatically reset once the internal temperature drops. If the issue persists, contact a qualified technician.
Can the PLX100E be used in a bathroom?
No, this model is designed for indoor use only and should not be installed in bathrooms or other high-humidity areas unless specifically rated for such environments. Check the user manual for zone requirements.
What is the recommended clearance around the heater?
Maintain at least 50 cm (20 inches) clearance above and 30 cm (12 inches) from the sides and front. Never cover the heater or place objects on top.
How do I clean the Dimplex PLX100E?
Turn off and unplug the heater, then allow it to cool completely. Use a soft, dry cloth to wipe the exterior. Do not use water, detergents, or abrasive cleaners. For internal dust, use a vacuum with a brush attachment on the vents.
Can I paint the heater?
No, painting the heater can affect performance and may cause fire hazards. The factory finish is designed to withstand high temperatures. Do not apply any coatings.
What should I do if the heater does not turn on?
Check that the power cord is securely plugged into a working outlet. Ensure the thermostat dial is set above the current room temperature. If still not working, press the reset button on the plug (if present) or check the circuit breaker. If the problem persists, contact customer support.
Is the PLX100E suitable for use with a timer or smart plug?
Yes, as long as the external controller is rated for the heater's power (1000 W). Ensure the plug is fully inserted and the timer/smart plug does not cover the heater's controls.
Does the unit have a battery backup for settings?
No, the PLX100E uses manual mechanical controls. There are no digital settings to save, so no battery is required.
Where can I find spare parts for my Dimplex PLX100E?
Contact an authorized Dimplex service center or use the official spare parts website. Common parts include feet, brackets, and thermostats. Provide your model number (PLX100E) for correct identification.
Can the heater be installed on a wooden wall?
Yes, but ensure the wall is strong enough to support the weight. Use the provided wall brackets and appropriate fixings for your wall type. Do not install directly onto combustible surfaces.
User questions about PLX100E DIMPLEX
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Heating in PDF format for free! Find your manual PLX100E - DIMPLEX and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. PLX100E by DIMPLEX.
USER MANUAL PLX100E DIMPLEX
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : DIMPLEX
Model : PLX100E
Category : Heating