SX-1 - Uncategorized TASCAM - Free user manual and instructions
Find the device manual for free SX-1 TASCAM in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Brand | TASCAM |
| Model | SX-1 |
| Product Type | Digital Audio Workstation / Mixer |
| Recording Format | Hard disk recording, up to 24-bit/96kHz |
| Number of Tracks | 16-track simultaneous recording |
| Input Channels | 24 input channels with 8 XLR/TRS combo jacks |
| Output Channels | Stereo main outputs, 8 aux sends, 4 bus outputs |
| Display | 12.1-inch TFT color touchscreen |
| Dimensions (W x D x H) | 20.1 x 15.4 x 6.1 inches (511 x 391 x 155 mm) |
| Weight | 15.4 lbs (7.0 kg) |
| Power Supply | AC 100-240V, 50/60 Hz, 50W |
| Power Consumption | 50W typical |
| Storage | Internal 40GB hard drive |
| Effects | Built-in DSP effects: reverb, delay, chorus, etc. |
| Connectivity | MIDI I/O, USB 2.0, S/PDIF, ADAT (optional) |
| Maintenance | Clean exterior with a soft, dry cloth. Keep vents free of dust. |
| Safety | Use only the supplied power cord. Do not expose to moisture. |
| Spare Parts and Repairability | Contact TASCAM authorized service centers for repairs. User-replaceable hard drive only. |
| General Information | Digital mixer/recorder designed for professional studio and live applications. |
Frequently Asked Questions - SX-1 TASCAM
How do I format the internal hard drive on the Tascam SX-1?
Go to Utility menu, select Disk, then Format. Confirm the action. All data will be erased.
Can I connect the SX-1 to a computer for file transfer?
Yes, use the USB 2.0 port on the rear panel. The SX-1 will appear as an external drive. You can copy audio files (WAV) directly.
How do I save a mix to an external USB drive?
Insert a USB drive, press System, then choose Save and select USB as the destination. Mixes are saved as stereo WAV files.
What is the maximum recording time on the internal hard drive?
With 40GB and 24-bit/96kHz, you can record approximately 4 hours of 16-track audio. Actual time depends on track count and sample rate.
How do I update the firmware?
Download the latest firmware from Tascam's website, copy to a USB stick, insert into the SX-1, and go to System -> Update. Do not power off during update.
Can I use external effects with the SX-1?
Yes, connect effects processors via the aux sends and return them to the stereo inputs or use the insert jacks on channels 1-8.
Why is the touch screen not responding?
Try recalibrating the touch screen: hold down the Utility button while powering on, then follow on-screen prompts to calibrate.
How do I record 16 tracks at once?
Connect all sources to the first 16 input channels, arm tracks 1-16 by pressing the Record button for each, then press the main Record and Play buttons.
What type of hard drive is used in the SX-1?
It uses a standard 3.5-inch SATA hard drive. Replacement requires opening the top cover and disconnecting the cable. Ensure the new drive is formatted in FAT32.
How do I reset the SX-1 to factory defaults?
Press and hold the Stop button while turning on the unit. Continue holding until the screen shows 'Factory Reset'. Confirm with Yes.
User questions about SX-1 TASCAM
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Uncategorized in PDF format for free! Find your manual SX-1 - TASCAM and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. SX-1 by TASCAM.
USER MANUAL SX-1 TASCAM
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : TASCAM
Model : SX-1
Category : Uncategorized