CS84U - Switch ATEN - Free user manual and instructions
Find the device manual for free CS84U ATEN in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | 4-Port USB KVM Switch |
| Model | CS84U |
| Brand | ATEN |
| Number of Ports | 4 (USB 2.0) |
| Supported Resolution | Up to 2048 x 1536 (DDC2B) |
| Video Signal Type | VGA (HD-15) |
| User Interface | Push-button and hotkey (Scroll Lock key combination) |
| Power Supply | USB powered (no external adapter required) |
| Power Consumption | 0.5W (typical) |
| Dimensions (W x D x H) | 150.0 x 82.5 x 25.0 mm |
| Weight | 0.41 kg |
| Operating Temperature | 0°C to 50°C |
| Storage Temperature | -20°C to 60°C |
| Humidity (Operating) | 0% to 80% RH, non-condensing |
| Main Functions | Switch between 4 computers using a single keyboard, mouse, and monitor; supports USB 2.0 peripherals; auto-scan mode |
| Maintenance | Clean with a dry cloth; avoid liquids; ensure proper ventilation |
| Safety | Only use with compatible USB devices; do not disassemble; keep away from moisture |
| Spare Parts | Not applicable (integrated unit) |
| Repairability | No user-serviceable parts; contact ATEN support for issues |
| Included Accessories | 1x CS84U unit, 4x USB cables, 1x VGA cable, user manual |
Frequently Asked Questions - CS84U ATEN
How do I switch between computers on the CS84U?
You can switch by pressing the port selection button on the front panel or by using the hotkey sequence: Scroll Lock + Scroll Lock + 1-4 (corresponding to the port number).
Does the CS84U support USB 3.0?
No, the CS84U supports USB 2.0 only. It is suitable for keyboards, mice, and other low-bandwidth peripherals.
Can I use the CS84U with a wireless keyboard and mouse?
Yes, as long as the wireless receiver is USB 2.0 compatible. Some receivers may require a direct port connection.
What is the maximum resolution supported?
The maximum resolution is 2048 x 1536 at 60 Hz with DDC2B support.
Does the CS84U require an external power adapter?
No, it is bus-powered via USB. Connect the USB cable from the 'USB Console' port to your computer to power the switch.
How do I perform a reset on the CS84U?
Press and hold the front panel button for 5 seconds until the LEDs flash. This resets the switch to factory defaults.
Can I connect the CS84U to a laptop with a USB-C port?
Yes, but you will need a USB-C to USB-A adapter or cable, as the CS84U uses standard USB-A connectors.
What cables are included with the CS84U?
The package includes 4x USB 2.0 cables and 1x VGA cable. Additional cables may be purchased separately.
Is the CS84U compatible with Mac and Linux?
Yes, it is operating system independent and works with Windows, macOS, Linux, and other systems that support USB HID.
How do I enable auto-scan mode?
Press Scroll Lock + Scroll Lock + S to start auto-scanning. It cycles through ports every 5 seconds. Press any key to exit.
User questions about CS84U ATEN
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Switch in PDF format for free! Find your manual CS84U - ATEN and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. CS84U by ATEN.
USER MANUAL CS84U ATEN
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : ATEN
Model : CS84U
Category : Switch