WS-8007U-C - Clock LA CROSSE TECHNOLOGY - Free user manual and instructions
Find the device manual for free WS-8007U-C LA CROSSE TECHNOLOGY in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Atomic Clock |
| Model | WS-8007U-C |
| Brand | La Crosse Technology |
| Power Source | 2 AA alkaline batteries (not included) |
| Dimensions (approx.) | 12.7 x 7.6 x 17.8 cm (5 x 3 x 7 in) |
| Weight (approx.) | 0.3 kg (0.66 lbs) |
| Time Signal | WWVB atomic radio signal (60 kHz) |
| Time Display | 12 or 24 hour format |
| Calendar | Month, date, day of week |
| Alarm Features | Single alarm with snooze function |
| Temperature Display | Indoor temperature (°F or °C) |
| Time Zone Setting | 7 time zones (AST, EST, CST, MST, PST, AKT, HAT) |
| Daylight Saving Time | Automatic DST adjustment (can be disabled) |
| Backlight | Blue LED backlight with adjustable brightness |
| Mounting Options | Table stand or wall mount |
| Battery Life (typical) | Approximately 12 months |
| Cleaning | Wipe with dry, soft cloth. Do not use abrasive cleaners. |
| Safety | Keep away from moisture and extreme temperatures. Adult supervision for battery replacement. |
| Spare Parts | Standard AA batteries; no specific spare parts available. |
| Repairability | No user-serviceable parts; contact La Crosse support for issues. |
Frequently Asked Questions - WS-8007U-C LA CROSSE TECHNOLOGY
How do I set the time on my La Crosse WS-8007U-C atomic clock?
The clock automatically sets itself after receiving the WWVB atomic signal. Insert batteries and wait up to 24 hours for synchronization. If needed, press and hold the SET button to manually set time zone, DST, and time format.
What batteries does the WS-8007U-C use?
It requires 2 AA alkaline batteries (not included). Do not use rechargeable batteries as they may not provide consistent power.
Why is my clock showing the wrong time?
The clock may not have received the atomic signal. Ensure it is at least 2 meters from electronic devices and metal. Try pressing the REC (receive) button to force a signal search. Also check the time zone and DST settings.
How do I change the time zone?
Press and hold the SET button until the time zone flashes. Use the + or - buttons to select your zone (AST, EST, CST, MST, PST, AKT, HAT). Press SET to confirm.
How do I turn off the alarm?
To disable the alarm, press the ALARM button until the alarm icon disappears. To stop a sounding alarm, press the SNOOZE button for 10 minutes or any other button to turn it off.
Can I adjust the backlight brightness?
Yes, press the SNOOZE button to cycle through: high, low, and off. The backlight is temporary and turns off after a few seconds.
How do I mount the clock on a wall?
Remove the table stand. Use a screw (not included) to attach the clock via the hole on the back. Ensure the wall can support the weight.
Does the clock automatically adjust for Daylight Saving Time?
Yes, the default setting is to automatically adjust for DST. To disable it, press and hold the SET button. When DST flashes, press the + or - button to turn DST off.
What should I do if the clock does not receive the atomic signal?
Place the clock near a window facing Fort Collins, Colorado. Keep it away from interference (TVs, computers). Press the REC button for 3 seconds to manually activate reception. It may take up to 12 hours.
How do I reset the clock?
Remove the batteries and wait 10 seconds. Reinsert fresh batteries. If problems persist, use a paperclip to press the RESET button located in the battery compartment.
User questions about WS-8007U-C LA CROSSE TECHNOLOGY
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Clock in PDF format for free! Find your manual WS-8007U-C - LA CROSSE TECHNOLOGY and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. WS-8007U-C by LA CROSSE TECHNOLOGY.