TA410 - Uncategorized Yeastar - Free user manual and instructions
Find the device manual for free TA410 Yeastar in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Analog Telephone Adapter (ATA) / VoIP Gateway |
| Model | TA410 |
| Brand | Yeastar |
| FXS Ports | 4 |
| Ethernet Ports | 1 (10/100 Mbps) |
| Dimensions (W x D x H) | 170 x 140 x 40 mm |
| Weight | 0.3 kg |
| Power Supply | External adapter, 12V DC, 1A |
| Protocol Support | SIP (RFC 3261), IAX2 |
| Voice Codecs | G.711, G.729, G.722, etc. |
| Main Functions | Connect analog phones to VoIP networks, call routing, IVR support |
| Maintenance | Keep in a dry, dust-free environment; reboot occasionally |
| Cleaning | Use a soft dry cloth; avoid liquid cleaners |
| Safety | Use only included power adapter; do not expose to water |
| Spare Parts | Power adapter, Ethernet cable (included); contact Yeastar for replacements |
| Repairability | No user-serviceable parts; refer to authorized service centers |
| General Information | Install between router/switch and analog phones; configure via web interface |
Frequently Asked Questions - TA410 Yeastar
How many analog phones can the Yeastar TA410 support?
The TA410 has 4 FXS ports, allowing connection of up to 4 analog phones or other analog devices directly.
What type of network connection does the TA410 require?
It requires an Ethernet connection to a router or switch with a 10/100 Mbps port via the built-in RJ45 interface.
Can I use the TA410 with any VoIP service provider?
The TA410 supports standard SIP protocol and should work with most SIP-based VoIP providers. Check provider compatibility.
How do I configure the Yeastar TA410?
Access the web-based configuration interface by entering the device's IP address in a browser. Default credentials are usually admin/admin. Consult the manual for detailed steps.
Does the TA410 support fax over IP (FoIP)?
Yes, it supports T.38 fax relay for transmitting faxes over IP networks with high reliability.
What power supply does the TA410 use?
It uses an external 12V DC power adapter (1A rating). Only use the included adapter to avoid damage.
Can I mount the TA410 on a wall?
The device is designed for desktop use. Wall mounting is not officially supported, but third-party mounts may work.
How do I reset the TA410 to factory defaults?
Locate the reset button (usually a small hole) on the device. Press and hold for 10 seconds with a paperclip while powered on.
What voice codecs does the TA410 support?
It supports G.711 (alaw/ulaw), G.729, G.722, and others for high-quality voice transmission.
Is it compatible with analog telephones from any brand?
Yes, standard analog phones with RJ11 connectors are compatible. Features like caller ID depend on phone support.
User questions about TA410 Yeastar
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Uncategorized in PDF format for free! Find your manual TA410 - Yeastar and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. TA410 by Yeastar.
USER MANUAL TA410 Yeastar
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Yeastar
Model : TA410
Category : Uncategorized