DS-3E0526P-E - Switch Hikvision - Free user manual and instructions
Find the device manual for free DS-3E0526P-E Hikvision in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Managed PoE+ Switch |
| Model | DS-3E0526P-E |
| Ports | 24 x 10/100/1000Base-T PoE+ (ports 1-24), 2 x 10/100/1000Base-T RJ45 uplink (ports 25-26) |
| PoE Standard | IEEE 802.3af/at |
| PoE Power Budget | 250 W |
| Switching Capacity | 52 Gbps |
| Packet Forwarding Rate | 38.69 Mpps |
| MAC Address Table | 8K |
| VLAN Support | Yes, up to 4K VLANs |
| Dimensions (W x D x H) | 440 mm x 220 mm x 44 mm |
| Weight | 4.5 kg |
| Power Supply | 100-240 V AC, 50/60 Hz |
| Power Consumption | Max 300 W (with PoE) |
| Operating Temperature | 0°C to 45°C |
| Storage Temperature | -40°C to 70°C |
| Humidity | 5% to 95% (non-condensing) |
| Main Functions | PoE, VLAN, QoS, Link Aggregation, IGMP Snooping, Port Mirroring, SNMP |
| Maintenance | Clean with a dry, soft cloth; avoid liquids |
| Safety | Indoor use only; keep away from water and heat sources |
| Spare Parts and Repairability | No user-serviceable parts; contact authorized service |
| General Information | Managed layer 2 switch for surveillance and enterprise networks |
Frequently Asked Questions - DS-3E0526P-E Hikvision
How do I reset the DS-3E0526P-E to factory defaults?
Press and hold the Reset button on the front panel for about 10 seconds until all LEDs flash. The switch will reboot with factory settings.
What is the total PoE power budget?
The DS-3E0526P-E provides a 250 W PoE power budget, supporting up to 30 W per port.
Can I use the uplink ports for PoE?
No, the uplink ports (25-26) are non-PoE and are intended for connection to the network backbone.
Does this switch support VLANs?
Yes, it supports 802.1Q VLAN with up to 4,000 VLAN groups, allowing network segmentation.
How do I access the web management interface?
Connect your computer to one of the switch's ports, set a static IP in the same subnet (default IP: 192.168.1.1), and enter the IP in a browser. Default username and password are admin/admin.
Is the switch fanless?
No, the DS-3E0526P-E has a fan for cooling. Ensure proper ventilation to prevent overheating.
Can I mount it in a rack?
Yes, it comes with rack-mount brackets and can be installed in a standard 19-inch rack.
What types of cables are recommended?
Use Cat5e or Cat6 Ethernet cables for best performance, especially for PoE and gigabit speeds.
Does it support QoS?
Yes, the switch supports 802.1p QoS for prioritizing traffic such as video and voice.
How do I update the firmware?
Download the latest firmware from Hikvision's website, then upload it via the web interface under System Management > Firmware Upgrade. Do not power off during the update.
User questions about DS-3E0526P-E Hikvision
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Switch in PDF format for free! Find your manual DS-3E0526P-E - Hikvision and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. DS-3E0526P-E by Hikvision.
USER MANUAL DS-3E0526P-E Hikvision
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Hikvision
Model : DS-3E0526P-E
Category : Switch