FDS-334T - Uncategorized BSS Audio - Free user manual and instructions
Find the device manual for free FDS-334T BSS Audio in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Digital Signal Processor (DSP) |
| Brand | BSS Audio |
| Model | FDS-334T |
| Form Factor | 1U Rackmount |
| Dimensions (W x H x D) | 19" x 1.75" x 8.5" (483 x 44 x 216 mm) |
| Weight | 7.5 lbs (3.4 kg) |
| Power Supply | AC 100-240V, 50/60 Hz, 30W max |
| Frequency Response | 20 Hz - 20 kHz (+/- 0.5 dB) |
| Dynamic Range | > 110 dB |
| Sample Rate | 48 kHz or 96 kHz (selectable) |
| Bit Depth | 24-bit |
| Inputs | 4x XLR analog inputs, 2x AES/EBU digital inputs |
| Outputs | 8x XLR analog outputs, 2x AES/EBU digital outputs |
| Processing Power | Dual-core 400 MHz DSP chip |
| Latency | < 1.5 ms at 48 kHz |
| Supported Audio Formats | PCM up to 24-bit/96 kHz |
| Control Interface | Ethernet (TCP/IP), RS-232, front panel LCD |
| Software Compatibility | BSS Audio Soundweb London, HiQnet |
| Operating Temperature | 32°F to 104°F (0°C to 40°C) |
| Certifications | CE, FCC Class A, RoHS |
| Included Accessories | Power cord, rackmount ears, quick start guide |
| Warranty | 3 years limited |
Frequently Asked Questions - FDS-334T BSS Audio
How do I connect the FDS-334T to my audio system?
Use the XLR analog inputs for line-level signals or the AES/EBU digital inputs for digital sources. Connect outputs to amplifiers or active speakers. Refer to the input/output section of the manual for detailed wiring diagrams.
What software can I use to configure the DSP?
The FDS-334T is compatible with BSS Audio Soundweb London and HiQnet software for full configuration, including EQ, delay, crossover, and matrix routing. Download the latest version from the BSS Audio website.
How do I reset the device to factory settings?
To perform a factory reset, press and hold the Setup button on the front panel while powering on the unit. Continue holding until the LCD displays 'Factory Reset' and then release. Confirm by pressing Enter.
What is the maximum input level the FDS-334T can handle?
The analog inputs accept up to +24 dBu maximum input level without clipping. For digital inputs, the level depends on the source; ensure the digital signal does not exceed 0 dBFS.
How do I update the firmware?
Download the latest firmware file from the BSS Audio support site. Connect the FDS-334T to your computer via Ethernet and use Soundweb London or HiQnet Firmware Manager to upload the file. Follow on-screen instructions.
Can I use the FDS-334T in a 19-inch rack?
Yes, the unit is 1U rackmount and comes with rackmount ears. Install it in a standard 19-inch rack using the included screws. Ensure proper ventilation.
What should I do if the device does not power on?
First, check the power cord connection and verify the outlet is working. Ensure the voltage selector (if present) matches your local mains voltage. If still off, inspect the fuse on the rear panel; replace with same type and rating if blown.
How do I clean the front panel?
Use a soft, dry cloth to wipe the front panel. For stubborn dirt, dampen the cloth slightly with water or a mild detergent. Avoid abrasive cleaners or solvents. Do not spray directly onto the unit.
Is the FDS-334T compatible with Dante?
No, the FDS-334T does not natively support Dante. It uses analog and AES/EBU digital connections. For Dante integration, use a separate format converter.
Where can I find the full user manual?
The complete user manual is available for free download on notice-facile.com in PDF format. Search for 'BSS Audio FDS-334T' and select your language.
User questions about FDS-334T BSS Audio
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Uncategorized in PDF format for free! Find your manual FDS-334T - BSS Audio and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. FDS-334T by BSS Audio.