Memphis Audio VIV750.6V2 - Receiver

VIV750.6V2 - Receiver Memphis Audio - Free user manual and instructions

Find the device manual for free VIV750.6V2 Memphis Audio in PDF.

📄 17 pages English EN Download 💬 AI Question 10 questions ⚙️ Specs
Notice Memphis Audio VIV750.6V2 - page 6
Pick your language and provide your email: we'll send you a specifically translated version.
Product Type Car Stereo Receiver
Brand Memphis Audio
Model VIV750.6V2
Dimensions (W x H x D) 7.0 x 2.0 x 6.5 inches
Weight 2.5 lbs
Power Supply 12V DC (negative ground)
Maximum Output Power 50W x 4 channels
Tuner Bands AM/FM
Bluetooth Yes (A2DP, AVRCP, HFP)
USB Port Front USB (compatible with MP3/WMA)
Auxiliary Input 3.5mm front AUX
Display Single-line LCD with white backlight
Audio Features Equalizer (Preset + Custom), High/Low pass filter
Remote Control Included (wired remote optional)
Installation DIN chassis, sleeve mount
Water Resistance IPX6 (marine grade)
Operating Temperature -20°C to 60°C
Warranty 1 year limited
Maintenance Clean with dry cloth; avoid liquids
Safety Fuse protection (10A ATC)
Spare Parts Availability Contact Memphis Audio support
Repairability Serviceable by authorized centers

Frequently Asked Questions - VIV750.6V2 Memphis Audio

How do I reset the Memphis Audio VIV750.6V2?
Press and hold the Reset button (located behind the faceplate) for 3 seconds using a pointed object.
How to pair a phone via Bluetooth?
Enable Bluetooth on your phone, press BT on the unit, select 'Memphis VIV750' from your phone's list, and confirm pairing.
What is the maximum USB drive capacity?
The USB port supports drives up to 32GB formatted in FAT32.
Can I connect a backup camera?
Yes, the unit has a dedicated rear camera input (RCA). Connection triggers automatic display when in reverse.
How do I set the clock?
Press and hold the DISP button until the time flashes, then rotate the volume knob to adjust hours/minutes.
The unit keeps turning off while driving. What should I do?
Check the power connections and ensure the fuse (10A ATC) is not blown. Also verify the ground connection is secure.
Does this receiver support satellite radio?
No, but it has an AUX input that can be used with an external satellite radio module.
What is the RMS power output?
The RMS output is 22W x 4 channels at 4 ohms (14.4V, 1% THD).
How to clean the faceplate?
Use a soft, dry microfiber cloth. Do not use any solvents or abrasives as they may damage the coating.
Where can I find the serial number?
The serial number is printed on a sticker on the top or bottom of the chassis.

User questions about VIV750.6V2 Memphis Audio

0 question about this device. Answer the ones you know or ask your own.

Ask a new question about this device

The email remains private: it is only used to notify you if someone responds to your question.

No questions yet. Be the first to ask one.

Download the instructions for your Receiver in PDF format for free! Find your manual VIV750.6V2 - Memphis Audio and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. VIV750.6V2 by Memphis Audio.

USER MANUAL VIV750.6V2 Memphis Audio

Manual assistant
Powered by Anthropic
Waiting for your message
Product information

Brand : Memphis Audio

Model : VIV750.6V2

Category : Receiver