DS-7104HGHI-K1 - Voice recorder Hikvision - Free user manual and instructions
Find the device manual for free DS-7104HGHI-K1 Hikvision in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | 4-Channel Digital Video Recorder (DVR) |
| Video Inputs | 4 BNC (analog HD or CVBS) |
| Audio Inputs | 1 RCA |
| Video Compression | H.264+ / H.264 |
| Recording Resolution | Up to 1080p @ 15 fps per channel |
| Hard Disk Drive | 1 SATA HDD (up to 10 TB) |
| Power Supply | 12 V DC, 1.5 A |
| Dimensions (W × D × H) | 200 × 200 × 45 mm |
| Weight | 0.8 kg |
| Operating System | Embedded Linux |
| Main Functions | Remote live view, playback, backup (USB/eSATA), motion detection, alarm inputs/outputs |
| Network Interface | 1 RJ45 10/100 Mbps |
| USB Ports | 2 USB 2.0 |
| eSATA Port | 1 |
| Maintenance & Cleaning | Use a soft dry cloth; avoid liquids and abrasives |
| Safety Precautions | Operate in a well-ventilated area; avoid exposure to moisture |
| Spare Parts & Repairability | Hard drive and power adapter are user-replaceable; other repairs should be done by a professional |
| Warranty | 2 years (depending on region) |
Frequently Asked Questions - DS-7104HGHI-K1 Hikvision
How do I connect cameras to the DS-7104HGHI-K1?
Connect analog HD (TVI/AHD/CVI) or CVBS cameras to the BNC inputs on the rear panel. Use 75-ohm coaxial cables. Ensure cameras are powered separately or via a power supply.
Can I use a hard drive larger than 10 TB?
The official maximum capacity is 10 TB. Larger drives may not be recognized or may cause instability. Check the compatibility list on Hikvision's website.
How do I set up remote viewing?
Connect the DVR to your router via Ethernet. Enable DHCP or set a static IP. Install the Hik-Connect app on your smartphone. Add the device by scanning the QR code or entering the serial number and password.
The DVR displays 'No Video' on one channel. What should I do?
Check the camera connection and power. Test the camera on another channel. If the channel works with a different camera, the original camera or cable may be faulty. Also verify the camera's video format is set correctly in the DVR menu.
How do I back up recorded footage?
Insert a USB drive into the DVR's USB port. Go to Playback, choose the desired time, and click Export. Select the USB device and format. You can also use the eSATA port for external HDDs.
What power adapter should I use?
Use only the original 12V DC, 1.5A power adapter supplied with the DVR. Using an incompatible adapter may damage the device.
Can I record audio with the DVR?
Yes, there is one RCA audio input. Connect a microphone or audio source. Audio recording must be enabled for each channel in the Recording menu. Note that audio recording may be restricted by local laws.
How do I reset the DVR to factory defaults?
Power off the DVR. Press and hold the Reset button (or a pin into the reset hole) while powering on. Keep holding for about 10 seconds until the device beeps. All settings will be cleared.
Does the DS-7104HGHI-K1 support H.265?
No. This model supports H.264+ and H.264 compression only. For H.265, consider newer models.
My DVR keeps beeping. What does it mean?
A continuous beep usually indicates a hard drive error or disk full. Check the HDD status in the menu. If the drive is faulty, replace it. A single beep may indicate an alarm event.
User questions about DS-7104HGHI-K1 Hikvision
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Voice recorder in PDF format for free! Find your manual DS-7104HGHI-K1 - Hikvision and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. DS-7104HGHI-K1 by Hikvision.
USER MANUAL DS-7104HGHI-K1 Hikvision
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Hikvision
Model : DS-7104HGHI-K1
Category : Voice recorder