CLN4X Plus - Printer SATO - Free user manual and instructions
Find the device manual for free CLN4X Plus SATO in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Industrial Barcode Printer |
| Print Technology | Direct Thermal / Thermal Transfer |
| Print Resolution | 203 dpi (8 dots/mm) |
| Print Speed | Up to 10 ips (254 mm/s) |
| Max Print Width | 4.1 inches (104 mm) |
| Max Media Width | 0.75 - 4.5 inches (19 - 114 mm) |
| Max Media Length | 59 inches (1500 mm) with tear-off; 39 inches (991 mm) with peel-off |
| Media Roll Diameter | Max 8.0 inches (203 mm) OD on 3-inch core |
| Interface | USB 2.0, RS-232C, Ethernet, Parallel (optional) |
| Memory | 16 MB Flash, 16 MB SDRAM |
| Dimensions (W x D x H) | 10.6 x 10.0 x 7.1 inches (270 x 254 x 180 mm) |
| Weight | 15.4 lbs (7.0 kg) |
| Power Supply | AC 120V, 60 Hz; AC 240V, 50 Hz; Power Consumption: 60W (standby), 150W (printing) |
| Operating Temperature | 41 - 104°F (5 - 40°C) |
| Relative Humidity | 20 - 80%, non-condensing |
| Main Functions | Print labels, tags, receipts; supports barcode symbologies (Code 39, Code 128, QR, etc.); label design software compatible |
| Maintenance | Clean print head and platen roller regularly; use SATO-approved cleaning supplies |
| Safety Features | Overheat protection, cover interlock switch, CE and FCC certified |
| Spare Parts & Repairability | Replaceable print head, platen roller, cutter (optional); support through SATO authorized service centers |
| General Information | Manufacturer: SATO Corporation; Model: CLN4X Plus; User manual available in PDF |
Frequently Asked Questions - CLN4X Plus SATO
How do I load media into the SATO CLN4X Plus?
Open the top cover, release the media hold, insert the roll onto the media spindle, and guide the label through the print mechanism. Ensure the media is aligned and close the cover before printing.
What type of labels can I use with this printer?
The CLN4X Plus supports both direct thermal and thermal transfer labels, with a width range of 0.75 to 4.5 inches. Use SATO-recommended media for best print quality.
How do I clean the print head?
Turn off the printer, open the top cover, and use a lint-free swab with isopropyl alcohol to gently wipe the print head in one direction. Allow it to dry before closing.
What software is compatible with the CLN4X Plus?
SATO's own Label Gallery software as well as third-party label design software that supports SATO command language (SBPL) or ZPL emulation.
How do I perform a factory reset?
Press and hold the FEED button while powering on the printer. Release the button when the LED blinks. The printer will reset to factory defaults.
What should I do if the printer is not feeding labels?
Check if the media is properly loaded, the cover is closed, and the gap sensor is aligned with the label gap. Perform a media calibration from the printer's menu.
How do I connect the printer to my network?
Use an Ethernet cable to connect the printer to your network router. Configure the IP address via the printer's front panel or DHCP. Refer to the manual for advanced settings.
Can I print on continuous labels?
Yes, but you need to set the printer to continuous media mode. Change the media type in the printer settings to 'Continuous' and adjust the label length accordingly.
What is the maximum print speed?
The CLN4X Plus can print up to 10 inches per second (ips) in normal mode. Speed may vary depending on print density and complexity.
Where can I find spare parts or service?
Contact SATO's authorized service centers or visit their official website for genuine spare parts such as print heads, platen rollers, and power supplies.
User questions about CLN4X Plus SATO
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Printer in PDF format for free! Find your manual CLN4X Plus - SATO and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. CLN4X Plus by SATO.
USER MANUAL CLN4X Plus SATO
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : SATO
Model : CLN4X Plus
Category : Printer