THAT-2 - Hi-Fi System JK Audio - Free user manual and instructions
Find the device manual for free THAT-2 JK Audio in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Hi-Fi System |
| Brand | JK Audio |
| Model | THAT-2 |
| Dimensions (W x H x D) | Approx. 430 x 100 x 300 mm |
| Weight | Approx. 5.2 kg |
| Power Supply | AC 100-240V, 50/60Hz |
| Power Consumption | 45W (typical) |
| Audio Output Power | 2 x 30W RMS |
| Frequency Response | 20Hz - 20kHz |
| Impedance | 4-8 ohms |
| Inputs | RCA, 3.5mm aux, Bluetooth |
| Outputs | Speaker terminals, headphone jack |
| Bluetooth Version | 5.0 |
| Supported Audio Formats | MP3, WAV, FLAC |
| Remote Control | Included (IR) |
| Main Functions | AM/FM radio, CD player, USB playback, Bluetooth streaming |
| Care and Cleaning | Wipe with a dry soft cloth; avoid liquids |
| Safety Features | Overheat protection, short-circuit protection |
| Spare Parts and Repairability | Replacement remote, power cord, and speaker terminals available |
| General Information | Designed for home audio entertainment |
Frequently Asked Questions - THAT-2 JK Audio
How do I connect my smartphone via Bluetooth?
Press the Bluetooth button on the unit or remote. Activate Bluetooth on your smartphone and select 'THAT-2' from the list.
Can I play CDs on this system?
Yes, the THAT-2 has a built-in CD player that supports CD, CD-R, and CD-RW discs.
How do I set the clock?
Press and hold the Clock button on the remote. Use the volume knob or remote arrows to set hours, then minutes. Press Clock again to confirm.
What should I do if there is no sound?
Check that the system is not muted, volume is turned up, and speakers are correctly connected. Also verify the input source is selected properly.
Can I connect external speakers?
Yes, the system has speaker terminals for passive speakers with impedance between 4 and 8 ohms.
How do I clean the device?
Use a soft dry cloth to wipe the exterior. Do not use any liquids or abrasive cleaners.
Does the system include a remote control?
Yes, an IR remote control is included for convenient operation.
Can I listen to FM radio without an antenna?
A FM wire antenna is included. Unfold it and extend for best reception.
How do I reset the system to factory settings?
Press and hold the Power button for 10 seconds until the display shows 'RESET'. Release and the system will restart.
What is the warranty period?
JK Audio offers a 1-year limited warranty against manufacturing defects. Please retain your proof of purchase.
User questions about THAT-2 JK Audio
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Hi-Fi System in PDF format for free! Find your manual THAT-2 - JK Audio and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. THAT-2 by JK Audio.
USER MANUAL THAT-2 JK Audio
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : JK Audio
Model : THAT-2
Category : Hi-Fi System