ACM-7411 - Uncategorized ACTi - Free user manual and instructions
Find the device manual for free ACM-7411 ACTi in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Network Camera |
| Dimensions | 100 mm x 80 mm x 50 mm |
| Weight | 0.5 kg |
| Power Supply | PoE (IEEE 802.3af) or DC 12V |
| Key Features | High-definition video, night vision, motion detection, remote access |
| Maintenance and Cleaning | Clean lens with soft, dry cloth; ensure vents are unobstructed |
| Security | Use strong passwords, enable encryption, and regularly update firmware |
| Spare Parts and Repairability | Contact authorized service center; limited user-serviceable parts |
| General Information | Brand: ACTi, Model: ACM-7411 |
Frequently Asked Questions - ACM-7411 ACTi
How do I reset the ACTi ACM-7411 to factory defaults?
Locate the reset button on the device and press and hold it for 10 seconds using a paperclip until the status LED blinks. The camera will reboot with factory settings.
What is the default IP address of the ACM-7411?
The default IP address is 192.168.0.100. You can also use ACTi’s Device Discovery Tool to locate the camera on your network.
How do I access the camera’s web interface?
Enter the camera’s IP address into a web browser. Use default credentials admin / 123456 (change on first login).
Can I mount the ACM-7411 outdoors?
Yes, the ACM-7411 is weatherproof with an IP67 rating, suitable for outdoor use.
Does the camera support ONVIF?
Yes, the ACM-7411 is ONVIF Profile S compliant, ensuring compatibility with most NVRs and VMS software.
How do I enable motion detection?
Log into the web interface, go to Events > Motion Detection, enable it, and draw detection zones. You can set triggers for email alerts or recording.
What is the maximum resolution and frame rate?
The camera supports up to 1920x1080 (1080p) at 30 fps.
How do I update the firmware?
Download the latest firmware from the ACTi website, go to System > Firmware Upgrade in the web interface, and upload the file. Do not power off during update.
What should I do if the camera is not showing video?
Check the network connection, ensure PoE is active or power adapter is plugged in. Verify the web browser supports ActiveX or use the H.264 stream via RTSP.
Is the camera compatible with Apple HomeKit?
No, the ACM-7411 does not natively support HomeKit. However, it can be integrated via a third-party bridge or through ACTi’s NVR.
User questions about ACM-7411 ACTi
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Uncategorized in PDF format for free! Find your manual ACM-7411 - ACTi and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. ACM-7411 by ACTi.
USER MANUAL ACM-7411 ACTi
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : ACTi
Model : ACM-7411
Category : Uncategorized