i9060 - Smoke detector KIDDE - Free user manual and instructions
Find the device manual for free i9060 KIDDE in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Type of Product | Smoke Detector |
| Brand | Kidde |
| Model | i9060 |
| Detection Type | Ionization |
| Power Source | 9V Alkaline Battery (included) |
| Battery Life | Up to 1 year under normal conditions |
| Dimensions (Diameter x Height) | 4.6 x 1.8 inches (117 x 46 mm) |
| Weight (with battery) | 7.4 oz (210 g) |
| Operating Temperature | 40°F – 100°F (4°C – 38°C) |
| Humidity Range | Up to 85% relative humidity (non-condensing) |
| Audible Alarm | 85 dB at 10 feet (3 meters) |
| Test/Silence Button | Yes, single button for test and silence (hush) |
| Low Battery Chirp | Approximately once per minute |
| End-of-Life Warning | Chirps every 30 days after 10 years |
| Interconnectivity | Not interconnectable (standalone) |
| Mounting | Ceiling or wall mount with included bracket |
| Certifications | UL listed (UL 217) |
| Warranty | 10-year limited warranty |
| Maintenance | Vacuum clean every month; wipe with damp cloth if needed |
| Replaceable Part | 9V battery (replace annually or when chirping) |
| Repairability | Not repairable; replace the entire unit after 10 years |
Frequently Asked Questions - i9060 KIDDE
How do I change the battery in the Kidde i9060?
To change the battery, remove the detector from its mounting bracket by twisting it counterclockwise. Open the battery compartment, replace the old 9V battery with a new high-quality alkaline battery, and reinstall the detector. Test the unit by pressing the test button.
Why does my Kidde i9060 keep chirping?
A chirp every minute typically indicates a low battery. Replace the battery immediately. If chirping continues after battery replacement, it may signal end-of-life after 10 years. Clean the detector if dust is present, and if the issue persists, replace the entire alarm.
How do I stop false alarms on the i9060?
If the alarm sounds without smoke, press the Test/Silence button to hush for about 15 minutes. Ensure the detector is not near cooking areas, steamy bathrooms, or dusty locations. Clean the unit with a vacuum cleaner or soft brush. Relocate if necessary.
Where should I install the Kidde i9060 smoke detector?
Install on the ceiling at least 4 inches (10 cm) from the wall, or on walls 4–12 inches (10–30 cm) from ceiling. Avoid kitchens, bathrooms, garages, and areas with high humidity or dust. Place in hallways, bedrooms, and near sleeping areas.
How long does the Kidde i9060 last?
The alarm itself has a lifespan of 10 years from the date of manufacture, as indicated on the label. Replace the entire unit after 10 years. The battery should be replaced annually or when the low battery chirp is heard.
Can the Kidde i9060 be interconnected with other alarms?
No, the i9060 is a standalone unit and does not support interconnection. For multiple detectors, choose Kidde models that are interconnectable (hardwired or wireless).
What does the silence (hush) feature do?
When the alarm is sounding, pressing the Test/Silence button will temporarily silence the alarm for approximately 15 minutes. This helps to reduce nuisance alarms from cooking smoke. During hush mode, the LED will flash every 10 seconds.
How do I clean the Kidde i9060?
Vacuum the vents and around the detector monthly using a soft brush attachment to remove dust and debris. For heavier dirt, wipe the exterior with a damp cloth (not wet). Do not use cleaning agents or sprays, as they may damage the sensor.
Is the Kidde i9060 suitable for kitchens or bathrooms?
No, avoid installing near kitchens, bathrooms, or other high-humidity areas. Steam and cooking smoke can cause frequent false alarms. Install at least 20 feet (6 meters) away from cooking appliances and 10 feet (3 meters) from bathrooms.
What does the end-of-life chirp sound like?
After 10 years, the alarm will emit two chirps every 30 seconds along with a flashing LED. This indicates the unit must be replaced. The battery alone cannot fix this; replace the entire smoke detector immediately.
User questions about i9060 KIDDE
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Smoke detector in PDF format for free! Find your manual i9060 - KIDDE and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. i9060 by KIDDE.
USER MANUAL i9060 KIDDE
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : KIDDE
Model : i9060
Category : Smoke detector