Bearcat 980SSB - Radio UNIDEN - Free user manual and instructions
Find the device manual for free Bearcat 980SSB UNIDEN in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | CB Radio with SSB |
| Brand | Uniden |
| Model | Bearcat 980SSB |
| Dimensions (W x H x D) | 7.5 x 2.5 x 9.5 inches |
| Weight | 2.5 lbs |
| Power Supply | 13.8V DC, Negative Ground |
| Frequency Range | 26.965-27.405 MHz (CB Band) |
| Channels | 40 CB Channels + 10 Weather Channels |
| Modulation Types | AM, USB, LSB |
| RF Power Output | 4W AM, 12W SSB |
| Receiver Sensitivity | 0.5 µV (AM), 0.25 µV (SSB) |
| Features | Noise Blanker, SWR Calibration, RF Gain, Dimmer, Memory Scan, PA/CB Switch |
| Display | Backlit LCD with S/RF Meter |
| Microphone | Dynamic, Coiled Cord with Push-to-Talk |
| Antenna Connector | UHF (SO-239) |
| Cleaning Instructions | Wipe with a soft, dry cloth. Do not use liquids or sprays. |
| Safety Precautions | Use only specified fuse (2A). Avoid exposure to rain or moisture. Do not open the unit. |
| Spare Parts & Repairability | Contact Uniden customer service for repairs. No user-serviceable parts inside. |
| Certifications | FCC Part 95 Certified |
| Warranty | 1 Year Limited Warranty |
Frequently Asked Questions - Bearcat 980SSB UNIDEN
How do I connect the antenna?
Connect a CB antenna with a UHF (PL-259) connector to the SO-239 jack on the back. Ensure the antenna is tuned for lowest SWR before transmitting.
What type of power supply do I need?
The radio requires a 13.8V DC power source with negative ground, capable of supplying at least 2.5A. Use the included DC power cord with a cigarette lighter plug or connect directly to a battery.
How do I use the SSB mode?
Press the MODE button to select USB or LSB. Adjust the CLARIFIER control for fine tuning. SSB provides extended range and better performance in weak signal conditions.
What is the SWR calibration for?
To calibrate SWR, press and hold the CAL button, then adjust the SWR CAL control until the meter reads CAL. This ensures accurate SWR readings when checking your antenna.
How do I store and recall memory channels?
To store, select a channel, press MEM then turn the channel knob to choose a memory location, then press MEM again. To recall, press MEM and rotate the knob to scroll through memories.
Why is my transmit power low?
Check that you are in AM mode (4W) or SSB (12W). Ensure the microphone is fully plugged in and the RF POWER control is turned up. Also verify the SWR is low to avoid power reduction.
How do I clean the radio?
Disconnect power. Wipe the exterior with a soft, lint-free cloth lightly dampened with water. Do not use chemical cleaners, abrasives, or spray liquids directly on the radio.
What type of fuse does it use?
It uses a 2A, 250V fast-blow fuse, typically a 5×20mm glass cartridge. Replace only with the same rating to prevent damage.
Can I use this radio for international communication?
No, the Bearcat 980SSB is designed for CB frequencies (26.965-27.405 MHz) in the United States. Using it outside CB bands or in other countries may violate local regulations.
How do I adjust the squelch?
Turn the SQL control clockwise until background noise stops. For weak signals, back it off slightly. The RF GAIN control can help improve reception.
User questions about Bearcat 980SSB UNIDEN
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Radio in PDF format for free! Find your manual Bearcat 980SSB - UNIDEN and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. Bearcat 980SSB by UNIDEN.
USER MANUAL Bearcat 980SSB UNIDEN
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : UNIDEN
Model : Bearcat 980SSB
Category : Radio