VCOG 1-6x24 - Binoculars Trijicon - Free user manual and instructions
Find the device manual for free VCOG 1-6x24 Trijicon in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Rifle Scope |
| Magnification | 1-6x |
| Objective Diameter | 24 mm |
| Reticle Type | Illuminated Segmented Circle (ISC) |
| Reticle Color | Red |
| Battery Type | CR2032 (replaceable) |
| Battery Life | Up to 600 hours at medium setting |
| Eye Relief | 3.1 - 3.7 inches |
| Exit Pupil | 4.0 - 4.2 mm at 6x |
| Field of View | 115.3 - 21.3 ft @ 100 yds |
| Weight | Approx. 1.4 lbs (635 g) |
| Length | 10.3 inches (262 mm) |
| Tube Diameter | 30 mm |
| Housing Material | Aluminum (anodized) |
| Water Resistance | Waterproof to 66 ft (20 m) |
| Fogproof | Yes (nitrogen purged) |
| Shockproof | Yes (tested to 50 G) |
| Cleaning Instructions | Clean lenses with soft cloth; use lens cleaning solution |
| Storage | Store in a dry place at room temperature |
| Warranty | Limited Lifetime Warranty from Trijicon |
Frequently Asked Questions - VCOG 1-6x24 Trijicon
How do I install batteries in the Trijicon VCOG 1-6x24?
The battery compartment is located on the side of the scope. Use a coin or screwdriver to rotate the cap counterclockwise to access the CR2032 battery. Insert the battery with the positive side facing up, then replace the cap and tighten securely.
What is the battery life of the VCOG?
Battery life varies by illumination setting. On medium brightness, it lasts approximately 600 hours. On low settings, it can exceed 2000 hours. It's recommended to turn off illumination when not in use to conserve power.
How do I zero the VCOG scope?
Zeroing is done by adjusting windage and elevation turrets. Remove the turret caps, use a coin or flathead screwdriver to turn the turrets in the desired direction. Each click typically corresponds to 0.5 MOA or 0.1 MRAD depending on model. Refer to the manual for exact values.
Is the VCOG waterproof?
Yes, the VCOG is waterproof to 66 feet (20 meters) and is nitrogen purged to prevent fogging. It can withstand harsh weather conditions.
Can I use the VCOG without batteries?
Yes, the reticle is etched and remains visible even without power. However, the illumination will not function without batteries.
How do I clean the lenses?
Use a soft lens brush or microfiber cloth to remove dust. For smudges, apply a small amount of lens cleaning solution to the cloth, not directly on the lens, and wipe gently. Avoid abrasive materials.
What is the recommended storage procedure?
Store the scope in a cool, dry place. Remove batteries if storing for extended periods to prevent corrosion. Keep lens caps on when not in use.
Does the VCOG have a lifetime warranty?
Trijicon offers a Limited Lifetime Warranty that covers defects in materials and workmanship. Normal wear and tear, misuse, or unauthorized modifications are not covered.
What type of mounts are compatible?
The VCOG has a 30 mm tube and typically comes with a QD mount. It is compatible with most standard 30 mm rings or mounts designed for rifle scopes.
How do I adjust the brightness of the reticle?
The brightness is controlled by a rotary dial on the side of the scope. Turn the dial clockwise for higher brightness and counterclockwise for lower. There are multiple settings, including off positions.
User questions about VCOG 1-6x24 Trijicon
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Binoculars in PDF format for free! Find your manual VCOG 1-6x24 - Trijicon and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. VCOG 1-6x24 by Trijicon.