512-85937 - Clock LA CROSSE TECHNOLOGY - Free user manual and instructions
Find the device manual for free 512-85937 LA CROSSE TECHNOLOGY in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Atomic Digital Clock |
| Model Number | 512-85937 |
| Brand | La Crosse Technology |
| Dimensions (H x W x D) | 7.0 x 5.0 x 2.0 inches |
| Weight | 0.5 pounds |
| Power Source | 2 AA alkaline batteries (not included) |
| Battery Life | Approximately 12 months |
| Display Type | LCD with large digits |
| Time Setting | Automatic atomic time via WWVB radio signal |
| Time Zones | 7 time zones (AST, EST, CST, MST, PST, AKST, HAST) |
| DST Adjustment | Automatic daylight saving time (ON/OFF selectable) |
| Indoor Temperature | Display range: 0°F to 122°F (-18°C to 50°C) |
| Indoor Humidity | Display range: 10% to 99% RH |
| Alarm Function | Single daily alarm with snooze (10 minutes) |
| Calendar Display | Month, date, and day of the week |
| Morning Sensation | Progressive crescendo alarm volume |
| Mounting Options | Table stand or wall mount keyhole |
| Maintenance | Clean with a soft, dry cloth; avoid liquids |
| Safety Warnings | Keep away from water and extreme temperatures; do not disassemble |
| Spare Parts & Repairability | No user-serviceable parts; contact support for repairs |
| Warranty | 1-year limited warranty |
Frequently Asked Questions - 512-85937 LA CROSSE TECHNOLOGY
How do I set the time on my La Crosse Technology 512-85937 clock?
The clock automatically sets itself via the atomic time signal (WWVB). If manual setting is needed, hold the SET button for 3 seconds, then adjust using the +/- buttons.
Why is my clock not receiving the atomic signal?
Place the clock near a window facing Fort Collins, Colorado (direction depends on your location). Avoid interference from electronics or metal. The signal reception icon will flash during sync.
What type of batteries does the clock require?
It uses 2 AA alkaline batteries (not included). Do not use rechargeable batteries as they may not provide sufficient voltage.
How do I set the alarm?
Press and hold the ALARM button for 3 seconds. Use the +/- buttons to set the hour, then press ALARM again to set minutes. Press SET to confirm.
How do I turn off the snooze function?
When the alarm sounds, press the SNOOZE button for 10 minutes delay. To disable snooze, press any other button. To turn off the alarm permanently, press ALARM to toggle alarm off.
The display shows 'LL.L' or 'HH.H'. What does that mean?
LL.L indicates temperature below 0°F, HH.H indicates temperature above 122°F. Move the clock to a more moderate environment.
Can I mount the clock on a wall?
Yes, there is a keyhole slot on the back. Use a screw to hang it. Ensure the wall is sturdy and the clock is level.
How do I clean the clock?
Wipe the exterior with a soft, dry cloth. Do not use water, cleaners, or abrasives. Keep the sensors clean for accurate readings.
What should I do if the clock is not responding?
Remove the batteries, wait 30 seconds, and reinsert them. If the issue persists, reset by pressing the RESET button with a paper clip.
Is the clock compatible with outdoor sensors?
No, this model only displays indoor temperature and humidity. It does not support external sensors.
User questions about 512-85937 LA CROSSE TECHNOLOGY
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Clock in PDF format for free! Find your manual 512-85937 - LA CROSSE TECHNOLOGY and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. 512-85937 by LA CROSSE TECHNOLOGY.
USER MANUAL 512-85937 LA CROSSE TECHNOLOGY
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : LA CROSSE TECHNOLOGY
Model : 512-85937
Category : Clock