380462 - Multimeter Extech - Free user manual and instructions
Find the device manual for free 380462 Extech in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Digital Multimeter |
| Model | 380462 |
| Brand | Extech |
| Display | 2000-count LCD |
| AC Voltage Range | 200mV to 600V |
| DC Voltage Range | 200mV to 600V |
| AC Current Range | 200μA to 10A |
| DC Current Range | 200μA to 10A |
| Resistance Range | 200Ω to 20MΩ |
| Continuity Test | Yes, with buzzer |
| Diode Test | Yes |
| Battery Test | 1.5V and 9V |
| Data Hold | Yes |
| Auto Power Off | Yes, after 15 minutes |
| Power Supply | 9V battery (NEDA 1604) |
| Dimensions | 143 x 74 x 38 mm |
| Weight | Approx. 320g (including battery) |
| Safety Rating | CAT II 600V |
| Operating Temperature | 0°C to 40°C (32°F to 104°F) |
| Storage Temperature | -10°C to 50°C (14°F to 122°F) |
| Included Accessories | Test leads, battery, user manual |
| Maintenance | Clean with dry cloth; replace battery when low |
| Repairability | Refer to user manual for fuse replacement; contact Extech support |
Frequently Asked Questions - 380462 Extech
How do I replace the battery in my Extech 380462 multimeter?
To replace the battery, turn off the meter and remove the test leads. Unscrew the battery compartment cover on the back, remove the old 9V battery, and insert a new one (NEDA 1604). Reattach the cover.
What is the maximum voltage the Extech 380462 can measure?
The Extech 380462 can measure up to 600V AC or DC. It is rated CAT II 600V for safety.
Does the Extech 380462 have a continuity test?
Yes, it has a continuity test with an audible buzzer. Select the continuity mode, and place the probes across the circuit. A beep indicates continuity.
How do I use the data hold function?
Press the 'Data Hold' button to freeze the current reading on the display. Press again to release. This is useful for capturing fluctuating measurements.
What is the accuracy of the Extech 380462?
The basic DC voltage accuracy is ±0.5% of reading + 2 digits. Refer to the user manual for detailed accuracy specs for each range.
How do I test a diode with this multimeter?
Set the dial to the diode test mode. Connect the red probe to the anode and black to the cathode. The display shows the forward voltage drop. A good diode typically reads 0.5-0.8V.
Can I measure current above 10A?
No, the maximum current rating is 10A for 30 seconds. For higher currents, use a clamp meter or a different instrument.
What is the auto power-off feature?
The multimeter automatically turns off after 15 minutes of inactivity to conserve battery. Press any button to wake it up.
How do I clean the multimeter?
Use a soft, dry cloth to clean the casing. Do not use solvents or abrasive cleaners. Keep the input terminals dry and free of debris.
What does the 'battery test' function do?
The battery test function measures the voltage of 1.5V and 9V batteries under load. It indicates if the battery is good, low, or needs replacement.
User questions about 380462 Extech
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Multimeter in PDF format for free! Find your manual 380462 - Extech and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. 380462 by Extech.
USER MANUAL 380462 Extech
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Extech
Model : 380462
Category : Multimeter