IC-A16 - Radio ICOM - Free user manual and instructions
Find the device manual for free IC-A16 ICOM in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | VHF Air Band Transceiver |
| Brand | ICOM |
| Model | IC-A16 |
| Frequency Range | 118.000 – 136.975 MHz |
| Number of Channels | 760 (25 kHz spacing) |
| RF Output Power | 5 W (typical) |
| Power Source | Rechargeable Li-ion battery pack (7.2 V, 1300 mAh) |
| Dimensions (W × H × D) | 58 × 120 × 36 mm (2.3 × 4.7 × 1.4 in) |
| Weight | Approx. 330 g (11.6 oz) with antenna and battery |
| Operating Temperature | -20°C to +60°C (-4°F to +140°F) |
| Antenna Impedance | 50 Ω |
| Modulation | FM (F3E) |
| Sensitivity (typical) | 0.5 μV for 12 dB SINAD |
| Audio Output Power | 400 mW at 16 Ω (typical) |
| Key Functions | Monitor, Dual Watch, Memory, Scan, Side Tone, Lock, Squelch |
| Display | Backlit LCD with channel number, frequency, and status icons |
| Battery Life | Approx. 14 hours (TX 5W: 5%, RX: 5%, Standby: 90%) |
| Charging Time | Approx. 3 hours with BC-197 charger |
| Dust and Water Resistance | IP54 (protected against limited dust ingress and water spray) |
| Accessories Included | Battery pack (BP-264), antenna (FA-SC61V), belt clip (MB-124), hand strap |
| Cleaning | Wipe with a dry, soft cloth; avoid solvents or excessive water |
| Spare Parts Availability | Battery, belt clip, antenna, charger available via ICOM dealers |
| Repair Service | Contact ICOM authorized service centers for repairs |
| Safety | Use only ICOM accessories; do not operate in explosive atmospheres |
Frequently Asked Questions - IC-A16 ICOM
What frequency range does the ICOM IC-A16 cover?
The IC-A16 covers the VHF air band from 118.000 to 136.975 MHz with 760 channels at 25 kHz spacing.
Is the IC-A16 waterproof?
It is rated IP54, meaning it is protected against limited dust ingress and water spray, but it is not waterproof. Avoid submersion.
How long does the battery last on a full charge?
Battery life is approximately 14 hours under typical usage (5% transmit at 5W, 5% receive, 90% standby).
Can I charge the battery while it is attached to the radio?
Yes, you can charge the battery in the radio using the optional BC-197 charger or a compatible drop-in charger.
What type of battery does the IC-A16 use?
It uses a rechargeable Li-ion battery pack (model BP-264, 7.2V, 1300 mAh).
Does the IC-A16 have a scan function?
Yes, it features a scan function that can scan all channels or memory channels, and you can set priority channels.
How do I clean the IC-A16?
Use a dry, soft cloth to wipe the radio. Avoid harsh chemicals, solvents, and excessive water to prevent damage.
Can I program frequencies from the keypad?
Yes, you can manually enter frequencies via the keypad or store them to memory channels for quick recall.
What is the output power of the IC-A16?
The RF output power is 5 Watts (typical) on high power; there may be a low power setting for battery conservation.
Where can I get replacement parts or repairs?
Contact an ICOM authorized dealer or service center for genuine spare parts and professional repairs.
User questions about IC-A16 ICOM
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Radio in PDF format for free! Find your manual IC-A16 - ICOM and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. IC-A16 by ICOM.