RT300 - Lawn mower ROBOMOW - Free user manual and instructions
Find the device manual for free RT300 ROBOMOW in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Robotic Lawn Mower |
| Brand | Robomow |
| Model | RT300 |
| Dimensions (L x W x H) | 58 x 36 x 28 cm |
| Weight | 12 kg |
| Battery Type | Li-ion 18V |
| Battery Capacity | 2.1 Ah |
| Charging Time | 60 minutes |
| Mowing Time | 45 minutes |
| Cutting Width | 18 cm |
| Cutting Height Range | 20 - 60 mm |
| Cutting Height Adjustment | Manual, 3 steps |
| Maximum Slope | 20% (11°) |
| Coverage Capacity | Up to 300 m² |
| Control Method | Smartphone app (Bluetooth) |
| Rain Sensor | Yes |
| Lift / Tilt Sensor | Yes |
| Blade Type | Free-floating 3-blade disc |
| Blade Replacement | Recommended every 3-4 months |
| Power Supply | Docking station included |
| Noise Level | < 60 dB |
| Protection Class | IPX4 |
| Warranty | 2 years |
Frequently Asked Questions - RT300 ROBOMOW
How do I set up the boundary wire for the Robomow RT300?
Lay the boundary wire around the mowing area, securing it with pegs. Ensure the wire forms a continuous loop and connect it to the charging station. Refer to the manual for detailed placement guidelines.
What should I do if the RT300 does not return to the charging station?
Check that the boundary wire is intact and the charging station's guide wire is properly aligned. Ensure the mower's battery is not completely depleted. Clean the charging contacts on both the mower and station.
How often should I replace the blades on the RT300?
Blades should be replaced every 3 to 4 months for optimal cutting performance. Replace them sooner if you notice uneven cutting or increased noise.
Can the Robomow RT300 handle wet grass?
It is not recommended to mow wet grass as it can clog the mower and reduce cutting efficiency. The rain sensor will send the mower back to the charging station if rain is detected.
What is the maximum lawn area the RT300 can cover?
The Robomow RT300 is designed for lawns up to 300 square meters. Performance may vary based on lawn complexity and obstacles.
How do I adjust the cutting height on the RT300?
Turn the mower over and manually turn the cutting height knob to one of three positions: low (20 mm), medium (40 mm), or high (60 mm).
The RT300 stops after a few minutes of mowing. What could be wrong?
Check if the blade disc is obstructed by grass or debris. Also, ensure the battery is fully charged. If the problem persists, the blade disc may need replacement.
Is the Robomow RT300 safe for pets and children?
Yes, the mower has lift and tilt sensors that immediately stop the blades when the mower is lifted or tilted. It also has a rain sensor and operates at a low noise level.
How do I clean the Robomow RT300?
Turn off the mower and remove the battery. Use a soft brush or cloth to clean the exterior, blade disc, and sensors. Avoid using water or solvents.
Where can I find spare parts for the RT300?
Spare parts such as blades, wheels, and batteries can be purchased from authorized Robomow dealers or online through the official Robomow website.
User questions about RT300 ROBOMOW
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Lawn mower in PDF format for free! Find your manual RT300 - ROBOMOW and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. RT300 by ROBOMOW.
USER MANUAL RT300 ROBOMOW
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : ROBOMOW
Model : RT300
Category : Lawn mower