LC20E - Dishwasher VOX - Free user manual and instructions
Find the device manual for free LC20E VOX in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Compact Dishwasher |
| Dimensions (H x W x D) | 82 cm x 45 cm x 55 cm |
| Weight | 35 kg |
| Power Supply | 220-240 V, 50 Hz, 10 A |
| Energy Class | A+ |
| Number of Programs | 6 (Eco, Intensive, Normal, Quick, Rinse, Glass) |
| Capacity | 10 Place Settings |
| Noise Level | 49 dB |
| Water Consumption | 10 L per Cycle |
| Delay Start | Yes, up to 24 hours |
| Adjustable Racks | Yes, upper basket adjustable |
| Salt and Rinse Aid Indicators | Yes |
| Filter System | Self-cleaning microfilter |
| Safety Features | Child lock, Anti-flood system, Overheat protection |
| Maintenance | Clean filters monthly, descale every 3 months |
| Spare Parts Available | Filters, spray arms, baskets, heating element |
| Brand | VOX |
| Model | LC20E |
Frequently Asked Questions - LC20E VOX
How do I install the VOX LC20E dishwasher?
Ensure the installation site has a water supply and drain connection. Level the dishwasher using the adjustable feet. Connect the inlet hose to a cold water tap and the drain hose to a sink drain outlet. Plug into a grounded outlet. Refer to the manual for detailed steps.
What should I do if the dishes are not clean?
Check that the spray arms are not blocked. Clean the filters and ensure you are using the correct detergent and rinse aid. Select an appropriate program (e.g., Intensive for heavily soiled dishes). Also verify water temperature is at least 50°C.
How do I activate the child lock?
Press and hold the 'Start' button for 3 seconds. The child lock indicator light will turn on. To deactivate, press and hold again for 3 seconds. This prevents accidental program changes during operation.
What does the E1 error code mean?
E1 indicates a water supply issue. Check that the water tap is fully open and the inlet hose is not kinked. Also inspect the inlet filter for clogs. If the error persists, contact customer service.
How often should I clean the dishwasher filters?
Clean the filters every 1-2 months to maintain performance. Remove the lower rack, twist the filter assembly counterclockwise, rinse under running water, and reassemble. A dirty filter can cause poor cleaning results.
Can I use regular dish soap instead of dishwasher detergent?
No, use only dishwasher-specific detergent (powder, gel, or tablets). Regular dish soap creates excessive suds that can damage the appliance and cause leaks. Follow the detergent manufacturer's dosage instructions.
Why is the dishwasher not draining?
Check the drain hose for kinks or blockages. Clean the drain pump filter located at the bottom of the dishwasher. Ensure the sink drain is not clogged. If the problem continues, the pump may need servicing.
How do I adjust the upper rack height?
Pull the upper rack out halfway. Locate the release levers on each side of the rack. Press the levers and lift the rack to the desired height (lower or higher position). Release the levers to lock in place.
What type of rinse aid should I use?
Use a standard liquid rinse aid specifically designed for dishwashers. Fill the rinse aid dispenser until the indicator turns dark. Adjust the dosage setting (1-6) based on water hardness to avoid spots or streaks on glassware.
How do I descale the VOX LC20E?
Run an empty cycle with a descaler product (citric acid or commercial descaler) placed in the detergent compartment. Select the highest temperature program. Repeat every 3 months to prevent limescale buildup, especially in hard water areas.
User questions about LC20E VOX
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Dishwasher in PDF format for free! Find your manual LC20E - VOX and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. LC20E by VOX.