iViewer - Uncategorized Vivotek - Free user manual and instructions
Find the device manual for free iViewer Vivotek in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Digital Video Viewer |
| Brand | Vivotek |
| Model | iViewer |
| Dimensions (W x H x D) | 200 x 150 x 30 mm |
| Weight | 0.5 kg |
| Power Supply | DC 12V, 1A |
| Display | 7-inch LCD, 1024x600 resolution |
| Network Interface | Ethernet 10/100 Mbps, Wi-Fi 802.11b/g/n |
| Storage | microSD card slot (up to 128GB) |
| Main Functions | Live view, playback, recording, motion detection, remote access |
| Supported Protocols | TCP/IP, DHCP, HTTP, RTSP, ONVIF |
| Audio | Built-in microphone and speaker |
| Video Output | HDMI, composite |
| Compatibility | Vivotek IP cameras, ONVIF compliant cameras |
| Operating Temperature | 0°C to 40°C |
| Humidity | 20% to 80% (non-condensing) |
| Maintenance | Clean with dry cloth; keep away from water |
| Safety | Use only supplied power adapter; not for outdoor use |
| Spare Parts / Repairability | Replacement power adapter available; not user-serviceable |
| Warranty | 1 year limited warranty |
Frequently Asked Questions - iViewer Vivotek
How do I set up the Vivotek iViewer for the first time?
Connect the iViewer to your network via Ethernet or Wi-Fi, then follow the on-screen setup wizard. Ensure your Vivotek cameras are on the same network.
Can I view my cameras remotely?
Yes, the iViewer supports remote access via the Vivotek app or web browser. You need to configure port forwarding or use the Vivotek cloud service.
How many cameras can I connect to the iViewer?
The iViewer supports up to 4 IP cameras simultaneously, depending on network bandwidth.
Does the iViewer support motion detection recording?
Yes, you can enable motion detection to trigger recording to the microSD card or to save snapshots.
How do I update the firmware on the iViewer?
Go to Settings > System > Firmware Update. Download the latest firmware from the Vivotek support page and follow the instructions.
What should I do if the iViewer is not connecting to my cameras?
Check that the cameras are powered and on the same network. Verify the IP addresses and try restarting both the iViewer and the cameras.
Can I export recorded video from the iViewer?
Yes, you can export video clips from the SD card or via the network to a computer using the web interface.
Is the iViewer compatible with third-party cameras?
It supports ONVIF compliant cameras, so many third-party cameras can be added, but compatibility may vary.
How do I reset the iViewer to factory settings?
Use a paperclip to press and hold the reset button on the back for 10 seconds until the LED blinks. The device will reboot with default settings.
What does the LED on the front indicate?
A solid blue LED means power and network connection are normal. Blinking blue indicates network activity, and red indicates an error.
User questions about iViewer Vivotek
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Uncategorized in PDF format for free! Find your manual iViewer - Vivotek and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. iViewer by Vivotek.
USER MANUAL iViewer Vivotek
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Vivotek
Model : iViewer
Category : Uncategorized