SG10T - Barcode Reader Intermec - Free user manual and instructions
Find the device manual for free SG10T Intermec in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Barcode Reader |
| Brand | Intermec |
| Model | SG10T |
| Dimensions (H x W x D) | 7.2 x 4.1 x 2.8 in (18.3 x 10.4 x 7.1 cm) |
| Weight | 0.9 lbs (0.41 kg) |
| Power Source | USB bus power or optional Li-ion battery |
| Battery Life | Up to 8 hours continuous scanning |
| Scan Technology | Laser or 2D imager (model dependent) |
| Symbologies Supported | 1D (UPC, Code 39, Code 128) and 2D (QR, Data Matrix, PDF417) |
| Connectivity | USB, Bluetooth, RS-232 |
| Drop Specification | Withstands multiple drops from 6 ft (1.8 m) onto concrete |
| Enclosure Rating | IP54 (dust and water resistant) |
| Operating Temperature | 14°F to 122°F (-10°C to 50°C) |
| Storage Temperature | -40°F to 158°F (-40°C to 70°C) |
| Laser Class | Class 2 (IEC 60825-1) |
| Maintenance | Clean scan window with soft, dry cloth |
| Safety | Laser avoidance: do not stare into beam |
| Spare Parts Available | Replacement cable, battery, and scan window |
| Reparability | User-replaceable battery and cable; other repairs by authorized service |
| Warranty | 1 year limited warranty |
Frequently Asked Questions - SG10T Intermec
How do I connect the SG10T to my computer?
Connect the USB cable to the scanner and your computer. The scanner should be recognized automatically. If not, download the driver from the Intermec website.
What barcode types can the SG10T read?
The SG10T reads most 1D barcodes (UPC, Code 39, Code 128) and 2D barcodes (QR, Data Matrix, PDF417).
How do I reset the scanner to factory settings?
Scan the reset barcode from the user manual or press and hold the trigger for 10 seconds until the LED blinks red.
What is the battery life of the SG10T?
The optional Li-ion battery provides up to 8 hours of continuous scanning. Recharge via USB.
Can the SG10T be used wirelessly?
Yes, the SG10T supports Bluetooth connectivity. Pair it with your device following the instructions in the manual.
How do I clean the scan window?
Use a soft, lint-free cloth moistened with water or lens cleaner. Avoid abrasive materials that could scratch the window.
What does the LED indicator mean?
Green: ready to scan. Red: battery low or error. Blue: Bluetooth connected. Flashing: charging or scanning.
Is the SG10T drop-resistant?
Yes, it can withstand multiple drops from 6 feet (1.8 m) onto concrete. The rugged housing protects internal components.
Where can I find replacement parts?
Replacement cables, batteries, and scan windows are available from Intermec or authorized dealers. Check the website or contact support.
How do I update the firmware?
Download the latest firmware from the Intermec support site. Connect the scanner via USB and run the update tool included in the package.
User questions about SG10T Intermec
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Barcode Reader in PDF format for free! Find your manual SG10T - Intermec and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. SG10T by Intermec.
USER MANUAL SG10T Intermec
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Intermec
Model : SG10T
Category : Barcode Reader