Stage Switch POE - Network card Swissonic - Free user manual and instructions
Find the device manual for free Stage Switch POE Swissonic in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Network Switch with PoE |
| Model | Stage Switch POE |
| Brand | Swissonic |
| Category | Network Card |
| Dimensions (approx.) | 200 x 130 x 30 mm |
| Weight (approx.) | 0.5 kg |
| Power Supply | External power adapter (48V DC) or PoE powered |
| Ports | 5 x 10/100/1000 Mbps RJ45 |
| PoE Ports | 4 ports (IEEE 802.3af/at) |
| PoE Power Budget | 60W total |
| Switching Capacity | 10 Gbps |
| MAC Table Size | 8K entries |
| LED Indicators | Power, Link/Act, PoE |
| Operating Temperature | 0°C to 40°C |
| Installation | Desktop or wall-mountable |
| Included Accessories | Power adapter, user manual |
| Maintenance | Clean with dry cloth, avoid liquids |
| Repairability | No user-serviceable parts; contact support |
| Certifications | CE, FCC |
Frequently Asked Questions - Stage Switch POE Swissonic
How do I reset the Swissonic Stage Switch POE to factory defaults?
To reset the switch, press and hold the reset button on the front panel for 10 seconds using a paperclip. The switch will reboot with factory settings.
What is the PoE power budget of this switch?
The Swissonic Stage Switch POE provides a total PoE power budget of 60W, shared across the 4 PoE ports. Each port can deliver up to 30W if the total remains within budget.
Can I use the switch without PoE?
Yes. The switch functions as a standard network switch even if no PoE devices are connected. Simply connect non-PoE devices to any port; the PoE feature is only active when a powered device is detected.
How do I connect the switch to my network?
Connect an Ethernet cable from your router or modem to any port on the switch. Then connect your devices (e.g., computers, cameras) to the remaining ports using Ethernet cables. Power on the switch using the included adapter.
What should I do if an LED is not lighting up?
First, check that the power adapter is securely connected and the outlet is working. If the power LED is off, the switch may be defective. For link/act LEDs, verify the Ethernet cable is properly connected and the connected device is powered on.
Is the switch plug-and-play?
Yes, the Swissonic Stage Switch POE is a plug-and-play device. No configuration is required for basic operation. Simply connect power and devices, and the switch automatically learns and forwards traffic.
Can I mount the switch on a wall?
Yes, the switch has mounting holes on the underside for wall mounting. Use appropriate screws and anchors (not included) to secure it. Ensure ventilation holes are not obstructed.
What is the maximum cable length for PoE?
The maximum Ethernet cable length for PoE is 100 meters (328 feet) per IEEE standards. Use Cat5e or higher cable for best performance.
Does the switch support VLAN?
No, the Swissonic Stage Switch POE is an unmanaged switch and does not support VLAN configuration. It forwards all traffic to all ports as a standard hub.
How do I update firmware?
This switch does not have user-upgradeable firmware. It is designed to operate with factory-installed firmware. If issues arise, contact Swissonic support for assistance.
User questions about Stage Switch POE Swissonic
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Network card in PDF format for free! Find your manual Stage Switch POE - Swissonic and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. Stage Switch POE by Swissonic.
USER MANUAL Stage Switch POE Swissonic
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Swissonic
Model : Stage Switch POE
Category : Network card