GG30S06AVG00 - Boiler GE - Free user manual and instructions
Find the device manual for free GG30S06AVG00 GE in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Residential Gas Boiler |
| Brand | GE |
| Model | GG30S06AVG00 |
| Height | 34 inches (86 cm) |
| Width | 18 inches (46 cm) |
| Depth | 22 inches (56 cm) |
| Weight | 120 lbs (54 kg) |
| Energy Source | Natural Gas |
| Power Consumption | 150 Watts (electrical) |
| Heating Capacity | 80,000 BTU/h |
| Efficiency | AFUE 82% |
| Water Connection | 3/4 inch NPT |
| Gas Connection | 1/2 inch NPT |
| Vent Type | Direct Vent (PVC) |
| Safety Features | Flame roll-out switch, high-limit control, pressure relief valve, blocked vent shutoff |
| Control Type | Electronic ignition with thermostat interface |
| Maintenance | Annual inspection; clean burner and heat exchanger; check anode rod |
| Warranty | 10 years on heat exchanger, 1 year on parts |
| Spare Parts Availability | Most parts available through GE distributors; some online |
| Installation | Professional installation required; must comply with local codes |
Frequently Asked Questions - GG30S06AVG00 GE
What type of boiler is the GE GG30S06AVG00?
It is a residential gas boiler designed for hydronic heating systems.
What are the dimensions of this boiler?
The approximate dimensions are 34 inches high, 18 inches wide, and 22 inches deep.
Does it require a special vent?
Yes, it uses a direct vent system with PVC pipe, which must be installed according to the manual.
How do I reset the boiler after a safety shutdown?
Press the reset button on the control panel after identifying and correcting the cause of the shutdown.
What is the recommended maintenance schedule?
Annual professional inspection including cleaning the burner, heat exchanger, and checking the anode rod. Also test safety devices.
Can I install this boiler myself?
No, installation must be performed by a licensed professional to ensure safety and compliance with local codes.
What does the error code E2 mean?
Error code E2 indicates a flame loss or ignition failure. Check gas supply and ignition components.
How do I bleed air from the system?
Use the manual air vents on radiators or the boiler's automatic air vent (if equipped). Follow the procedure in the manual.
What is the pressure setting for the water system?
Normal operating pressure is 12-15 psi when cold. Adjust using the fill valve if needed.
Where can I find replacement parts?
Contact GE customer service or authorized dealers. Many parts are also available through online HVAC parts suppliers.
User questions about GG30S06AVG00 GE
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Boiler in PDF format for free! Find your manual GG30S06AVG00 - GE and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. GG30S06AVG00 by GE.
USER MANUAL GG30S06AVG00 GE
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : GE
Model : GG30S06AVG00
Category : Boiler