Soundweb London BLU-102 - Hi-Fi System BSS Audio - Free user manual and instructions
Find the device manual for free Soundweb London BLU-102 BSS Audio in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Digital Signal Processor (Hi-Fi System) |
| Model | Soundweb London BLU-102 |
| Dimensions (H x W x D) | 1U (44 mm) x 19" (482 mm) x 356 mm |
| Weight | 5.0 kg |
| Power Supply | 100-240 V AC, 50/60 Hz, 45 W |
| Analog Inputs | 8 balanced line inputs |
| Analog Outputs | 8 balanced line outputs |
| Digital Audio I/O | 1 AES3 input, 1 AES3 output |
| Control Network | Ethernet (TCP/IP, UDP, CobraNet) |
| Audio Processing | DSP with programmable routing, EQ, dynamics, delays |
| Sampling Rate | 48 kHz or 96 kHz |
| Dynamic Range | 114 dB typical |
| Frequency Response | 20 Hz - 20 kHz ± 0.5 dB |
| THD+N | < 0.005% at 1 kHz, +20 dBu |
| Operating Temperature | 0°C to 40°C |
| Rackmount | 19" rack mountable (1U) |
| Maintenance | Keep clean, avoid moisture, periodic firmware updates |
| Safety | Class 1, use grounded outlet, avoid liquid ingress |
| Spare Parts / Repairability | Contact BSS Audio or authorized service center |
| General Information | Part of Soundweb London family, designed for installed sound systems |
Frequently Asked Questions - Soundweb London BLU-102 BSS Audio
How do I reset the Soundweb London BLU-102 to factory defaults?
Press and hold the reset button on the rear panel for 5 seconds while powering on. All settings will revert to factory defaults.
What software is required to configure the BLU-102?
The device is configured using Soundweb London Software (available for Windows). It enables routing, EQ, and control programming.
Can the BLU-102 work with Dante?
The BLU-102 does not natively support Dante. However, it can be integrated via CobraNet or digital I/O options.
How do I connect the BLU-102 to my network?
Use a standard Ethernet cable to connect the LAN port to your network switch. Ensure IP addresses are properly configured in the software.
What is the maximum number of presets?
The BLU-102 supports up to 100 presets stored internally, recallable via logic inputs or network commands.
How do I update firmware?
Download the latest firmware from the BSS Audio website, then use the Soundweb London Software to upload it via Ethernet.
What are the input sensitivity settings?
Analog inputs can be set to +4 dBu or -10 dBV via software, with maximum input level +24 dBu.
The device is not powering on. What should I check?
Verify that the power cord is securely connected and the outlet is live. Check the internal fuse (T2A, 250V) on the power entry module.
Can I use the BLU-102 without a computer?
Once configured, the BLU-102 operates standalone. However, initial setup and adjustments require the Soundweb London Software.
Is the BLU-102 compatible with other Soundweb London devices?
Yes, it integrates seamlessly with other BLU, DSP, and I/O expansion units via CobraNet and control protocols.
User questions about Soundweb London BLU-102 BSS Audio
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Hi-Fi System in PDF format for free! Find your manual Soundweb London BLU-102 - BSS Audio and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. Soundweb London BLU-102 by BSS Audio.
USER MANUAL Soundweb London BLU-102 BSS Audio
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : BSS Audio
Model : Soundweb London BLU-102
Category : Hi-Fi System