Basic Router - Mixer Swissonic - Free user manual and instructions
Find the device manual for free Basic Router Swissonic in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Mixer / Audio Router |
| Brand | Swissonic |
| Model | Basic Router |
| Number of Channels | 2 |
| Inputs | 2x RCA, 2x 1/4" TS (Line) |
| Outputs | 2x RCA (Master), 1x 1/4" TRS (Headphones) |
| Equalizer | 2-band (Low, High) per channel |
| Crossfader | Yes, assignable |
| Power Supply | 12V DC, 500 mA (center positive) |
| Dimensions (W x D x H) | 200 mm x 150 mm x 60 mm |
| Weight | 1.2 kg |
| Material | Metal chassis, plastic knobs |
| Frequency Response | 20 Hz – 20 kHz ±0.5 dB |
| Signal-to-Noise Ratio | >90 dB |
| THD+N | <0.01% |
| Headphone Output Power | 150 mW into 32 Ω |
| Cleaning Instructions | Wipe with a soft, dry cloth. Do not use solvents. |
| Safety Warnings | Use only included power supply. Keep away from liquids. |
| Spare Parts Availability | Power supply and knobs available from Swissonic support. |
| Repairability | User replaceable: power supply, fader. Contact support for other parts. |
Frequently Asked Questions - Basic Router Swissonic
How do I connect my turntables to the Basic Router?
Use RCA cables to connect your turntables to the Line inputs. If your turntable has a phono output, ensure you connect it to a phono preamp first, as the Basic Router does not have a built-in phono preamp.
Can I use the Basic Router as a sound card for my computer?
No, the Basic Router is an analog mixer without USB connectivity. To record or play audio from a computer, you will need an external audio interface.
What power supply do I need for the Basic Router?
The mixer requires a 12V DC, 500 mA power supply with a center-positive barrel connector. Always use the included adapter to avoid damage.
How do I clean the mixer?
Disconnect the power supply and wipe the surface with a soft, dry cloth. For stubborn dirt, slightly dampen the cloth with water. Do not use alcohol or abrasive cleaners.
The crossfader is scratchy; what should I do?
A scratchy crossfader often indicates dust or wear. Try cleaning the fader track with compressed air. If the issue persists, the crossfader may need replacement; contact Swissonic support for a compatible part.
Can I connect a microphone to the Basic Router?
The Basic Router has line-level inputs only, so a standard dynamic or condenser microphone cannot be connected directly. You would need an external microphone preamp.
Why is there no sound from the headphones?
Ensure the headphones are plugged into the 1/4" TRS jack and the headphone volume knob is turned up. Also check that the Cue button for the desired channel is pressed.
What type of cables do I need for the outputs?
The Master outputs use RCA connectors, so standard RCA audio cables are required. For the headphones, use a 1/4" TRS stereo plug.
Is the Basic Router suitable for beginners?
Yes, it is a simple 2-channel mixer with basic EQ and a crossfader, making it ideal for DJ beginners or for use as a small audio router.
How do I assign the crossfader to a channel?
Each channel has a crossfader assign switch. Set it to A or B to route the channel to the left or right side of the crossfader respectively. Set to Off to bypass the crossfader.
User questions about Basic Router Swissonic
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Mixer in PDF format for free! Find your manual Basic Router - Swissonic and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. Basic Router by Swissonic.
USER MANUAL Basic Router Swissonic
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Swissonic
Model : Basic Router
Category : Mixer