ME-1 - Earplug ALLEN & HEATH - Free user manual and instructions
Find the device manual for free ME-1 ALLEN & HEATH in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Personal Monitor Mixer |
| Brand | Allen & Heath |
| Model | ME-1 |
| Dimensions (W x D x H) | 150 x 120 x 45 mm |
| Weight | 0.35 kg |
| Power Supply | Power over Ethernet (PoE) via ME-U hub |
| Power Consumption | 5.5 W |
| Number of Mix Channels | 16 (from ME-U system) |
| Equalizer | 3-band EQ per channel (Low, Mid, High) |
| Pan Control | Per channel pan |
| Aux Send | 1 aux send per channel |
| Headphone Output | 1/4" stereo jack, 32 ohm |
| Maximum Output Level | +20 dBu |
| Frequency Response | 20 Hz – 20 kHz |
| Display | 128 x 64 pixel OLED |
| Controls | Rotary encoders for volume, mute, and menu navigation |
| Compatibility | ME-U rack unit and other ME-series peripherals |
| Material | ABS plastic with metal chassis |
| Maintenance | Wipe with a soft, dry cloth. Do not use solvents. |
| Safety | Do not expose to rain or moisture. Use only with PoE. |
| Spare Parts / Repairability | Not user-serviceable. Contact authorized service center. |
| General Information | Part of the ME personal monitoring system by Allen & Heath |
Frequently Asked Questions - ME-1 ALLEN & HEATH
How do I connect the ME-1 to the system?
Connect the ME-1 to the ME-U hub using a standard Ethernet cable. The hub provides both audio and power via PoE.
How do I adjust the volume of a specific channel?
Use the rotary encoder for the desired channel. Press the encoder to mute/unmute the channel.
Can I use headphones other than the supplied ones?
Yes, the ME-1 has a 1/4" stereo headphone output. Use any headphones with an impedance of 32 ohms or higher.
How do I reset the ME-1 to factory settings?
Press and hold the menu button while powering on. Select 'Factory Reset' from the menu.
What is the maximum number of ME-1 units that can be connected?
The ME-U hub supports up to 16 ME-1 units (or a combination of ME-1 and ME-500 units).
How do I save a custom mix?
The ME-1 does not have onboard presets. Your mix is stored as long as the unit remains powered. To save, you can note down settings.Note: The ME-U system does not store per-device presets.
Why is there no audio from the ME-1?
Check the headphone connection and ensure the unit is receiving power via PoE. Verify that the master volume is not turned down and that the appropriate channels are not muted.
Can I use the ME-1 as a standalone mixer?
No, the ME-1 is a personal monitor mixer that requires a ME-U hub to receive audio signals. It cannot operate independently.
How do I update the firmware on the ME-1?
Firmware updates are done via the ME-U hub using the Allen & Heath ME software. Connect a computer to the hub and follow the update instructions.
What does the OLED display show?
The display shows channel names, levels, EQ settings, and menu options. Use the menu button to navigate.
User questions about ME-1 ALLEN & HEATH
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Earplug in PDF format for free! Find your manual ME-1 - ALLEN & HEATH and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. ME-1 by ALLEN & HEATH.
USER MANUAL ME-1 ALLEN & HEATH
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : ALLEN & HEATH
Model : ME-1
Category : Earplug