PE38S09KAG01 - Boiler GE - Free user manual and instructions
Find the device manual for free PE38S09KAG01 GE in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Boiler |
| Brand | GE |
| Model | PE38S09KAG01 |
| Energy Source | Natural Gas |
| Installation Type | Wall-mounted |
| Dimensions (HxWxD) | 30 x 18 x 12 inches |
| Weight | 45 lbs |
| Power Input | 150,000 BTU/h |
| Efficiency | 95% AFUE |
| Water Capacity | 2.5 gallons |
| Venting Type | Direct vent (PVC) |
| Control System | Digital thermostat with LCD display |
| Safety Features | Flame sensor, overheat protection, pressure relief valve |
| Warranty | 10 years on heat exchanger, 2 years on parts |
| Maintenance | Annual professional service recommended |
| Noise Level | < 50 dB |
| Electrical Requirements | 120V, 60Hz, 3A |
| Certification | ANSI Z21.13, CSA 4.9 |
Frequently Asked Questions - PE38S09KAG01 GE
What type of gas does the GE PE38S09KAG01 boiler use?
This boiler is designed for natural gas. Conversion to LP (propane) may be possible with a conversion kit.
How often should I service my GE boiler?
It is recommended to have your boiler serviced annually by a qualified technician to ensure efficiency and safety.
What is the warranty coverage for the PE38S09KAG01?
The boiler comes with a 10-year warranty on the heat exchanger and a 2-year warranty on parts.
Can I install this boiler myself?
No, installation must be performed by a licensed professional to comply with local codes and ensure safe operation.
What error code E1 means on the display?
Error code E1 indicates ignition failure. Check gas supply, spark electrode, and flame sensor. Contact a technician if issue persists.
How do I reset the boiler after a safety shutdown?
Press and hold the Reset button on the control panel for 3 seconds. If the issue recurs, consult the manual.
What is the recommended water pressure for operation?
The system should have a cold water pressure between 12 and 25 psi. Check the pressure gauge on the boiler.
Can I use this boiler with a radiant floor system?
Yes, but a mixing valve may be required to lower water temperature for floor heating. Consult the manual for compatibility.
Why is my boiler making a banging noise?
Banging noises often indicate air in the system or mineral buildup. Bleed the radiators and consider descaling.
How do I drain the boiler for maintenance?
Turn off power and gas, connect a hose to the drain valve at the bottom, and open the valve. Follow the manual for complete steps.
User questions about PE38S09KAG01 GE
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Boiler in PDF format for free! Find your manual PE38S09KAG01 - GE and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. PE38S09KAG01 by GE.
USER MANUAL PE38S09KAG01 GE
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : GE
Model : PE38S09KAG01
Category : Boiler